# Unexpected movement at the end of project

**URL:** <https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627>\
**Category:** No Judgement\
**Created:** [November 14, 2019, 3:01pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627 "2019-11-14T15:01:00Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jojo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jojo/32/14275_2.png) [@Jojo](https://forums.maslowcnc.com/u/Jojo)\
**Post date:** [November 14, 2019, 3:01pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/1 "2019-11-14T15:01:00Z")

</div>

Good morning! This is the second time I’ve had this issue and hoping you can help.

I generated the image from Easel’s Image Trace Feature, added a border and tabs. Once the carving was complete, my Maslow (which I just love watching work) went to return to the home position but didn’t raise the router bit and cut the line you see in red on the attached photo. I have no idea why this happened.

This occurred a couple of projects ago, but just once so I thought it was a one-time event. Since it’s happened twice now, I was hoping the collective could help me determine the issue and how to avoid it in the future. I’ve attached the G Code generated by Easel.

Disclaimer- I’m not a CNC or tech guy…this is completely new to me and I’m having lots of fun. However, if your response is anything above a 12th-grade math level, I may ping back for further clarification.

Thanks in advance for your time and help!

Jojo

 ![2019-11-14_9-38-13](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/5/54485d902c48b76dff75e3393f4cdcbbba6406f5.jpeg)  
[HaydensMonsterLogo.nc](https://forums.maslowcnc.com/uploads/short-url/A5vBPIkUcn8rCuTMSWAtDLWDN89.nc) (123.9 KB)

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [November 14, 2019, 3:11pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/2 "2019-11-14T15:11:57Z")

</div>

I can’t readily see anything wrong in the gcode. It is supposed to raise the z axis to 0.15 inches prior to moving to 0,0.

Is it possible that the z-axis control arm popped out of the router’s socket? This has happened to me a few times in the past and the z-axis never raised back up when it should have.

---

<div class="post-metadata">

**Author:** ![Jojo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jojo/32/14275_2.png) [@Jojo](https://forums.maslowcnc.com/u/Jojo)\
**Post date:** [November 14, 2019, 3:17pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/3 "2019-11-14T15:17:39Z")

</div>

@madgrizzle, thanks for the speedy reply! That’s a great question and I’ll check to see if the z-axis control arm has disconnected from the router.

---

<div class="post-metadata">

**Author:** ![Jojo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jojo/32/14275_2.png) [@Jojo](https://forums.maslowcnc.com/u/Jojo)\
**Post date:** [November 15, 2019, 12:58am UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/4 "2019-11-15T00:58:21Z")

</div>

@madgrizzle I checked and the z-axis is firmly connected to the router and looks like it didn’t disconnect. I ran another project and I didn’t experience the issue (although I had my finger over the mouse to slap the STOP button just in case)

---

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [November 15, 2019, 5:23pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/5 "2019-11-15T17:23:16Z")

</div>

I agree with @madgrizzle hunch that something mechanical is going on. Do you ever see any other strange z-axis behavior, or is it only at the very end of the project? Could the cable to the z-axis have come loose?

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [November 15, 2019, 5:38pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/6 "2019-11-15T17:38:03Z")

</div>

Are you using ground control or webcontrol?

---

<div class="post-metadata">

**Author:** ![madgrizzle](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/madgrizzle/32/1372_2.png) [@madgrizzle](https://forums.maslowcnc.com/u/madgrizzle)\
**Post date:** [November 15, 2019, 5:42pm UTC](https://forums.maslowcnc.com/t/unexpected-movement-at-the-end-of-project/11627/7 "2019-11-15T17:42:19Z")

</div>

One solution (and it’s not a very good one, but will work) is to edit the gcode to remove the return to center command. Leave the G1 Z0.15000 F9.0 command, but delete G0 X0.0000 Y0.00000 (and I don’t know the value of leaving in the G4 P0.1 command either… that can go).
