# Very frustrated and overwhelmed with software Fusion360

**URL:** <https://forums.maslowcnc.com/t/very-frustrated-and-overwhelmed-with-software-fusion360/1012>\
**Category:** No Judgement\
**Created:** [November 10, 2017, 10:29pm UTC](https://forums.maslowcnc.com/t/very-frustrated-and-overwhelmed-with-software-fusion360/1012 "2017-11-10T22:29:58Z")\
**Posts on this page:** 1\
**Showing post:** 27

<div class="post-metadata">

**Author:** ![MeticulousMaynard](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/meticulousmaynard/32/2744_2.png) [@MeticulousMaynard](https://forums.maslowcnc.com/u/MeticulousMaynard)\
**Post date:** [February 22, 2018, 3:49pm UTC](https://forums.maslowcnc.com/t/very-frustrated-and-overwhelmed-with-software-fusion360/1012/27 "2018-02-22T15:49:29Z")

</div>

I saw that! Exciting news! 😁 When I get home tonight I’m going to give the new post a go and see what the resulting G-Code looks like. I’ll keep you all posted! 😉

EDIT: I just found the “sample” button on that page. Lo and behold, we have G-Code!

Maslow Post:  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/9/9c25a20b824569995f6b29287fe412d1ecfd6d40.png)

GRBL Post:  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/f/f9630c45995cc8224c6a3fbd3148d74103ca017b.png)

Different programs, but I’m mostly looking at the start blocks.

G40 and G17 are unsupported by Ground Control, but otherwise this looks good. I like not seeing the M7/M8/M9 commands, GRBL always added those. Also doesn’t throw in G54 or G28, which is good.

---

_[View the full topic](https://forums.maslowcnc.com/t/very-frustrated-and-overwhelmed-with-software-fusion360/1012)._