# WebControl:51.27, Controller:51.28

**URL:** <https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825>\
**Category:** Troubleshooting\
**Created:** [October 1, 2020, 10:36pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825 "2020-10-01T22:36:06Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 1, 2020, 10:36pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/1 "2020-10-01T22:36:06Z")

</div>

Hello,

My computer/arduino is a little bit confused… when i open the Web control it said:  
Warning, you are running a Holey Calibration firmware that is newer than what is included in WebControl. This version may not work correctly with this version of WebControl.  
WebControl:51.27, Controller:51.28

I think this is because I was playing with Markerverse … where i have some troubles when I try to work with a gcode file… but this is other problem.

How do I put the controller version in 51.27?.. I try in ACTIONS-\>Upgrade Holy Firmware to 51.27… but dont work… how do i solve this issue?..

thank you

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 1, 2020, 10:54pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/2 "2020-10-01T22:54:08Z")

</div>

It is a warning only and should still function.

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 2, 2020, 10:38pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/3 "2020-10-02T22:38:52Z")

</div>

somthing is wrong, i delete all and reinstall webcontrol, now if i try to draw a simple circle, it said

Alarm: Connection Failed or Invalid Firmware

whe webcontrol start it said… and the versions dont match, is this the problem?

Connected on port /dev/ttyACM0

Sending: B05  
WebControl 1.27  
Firmware Version 1.26

Sending: G21  
Sending: $$  
firmwareKeyString Exception: value = 2440  
firmwareKeyString Exception: value = 1220  
firmwareKeyString Exception: value = 470  
firmwareKeyString Exception: value = 260  
firmwareKeyString Exception: value = 54  
firmwareKeyString Exception: value = 180.5  
firmwareKeyString Exception: value = 1766  
firmwareKeyString Exception: value = 69.85  
Exception in thread Thread-2:  
Traceback (most recent call last):  
File “threading.py”, line 914, in \_bootstrap\_inner  
File “site-packages/gevent/threading.py”, line 177, in run  
File “threading.py”, line 862, in run  
File “Background/messageProcessor.py”, line 32, in start  
File “config/config.py”, line 604, in receivedSetting  
File “config/config.py”, line 475, in syncFirmwareKey  
File “Actions/HoleySimulationKinematics.py”, line 557, in updateSetting  
TypeError: unsupported operand type(s) for /: ‘str’ and ‘float’

Sending: $0=2440  
Sending: $1=1220  
Sending: $3=470  
Sending: $4=260  
Sending: $6=54  
Sending: $8=180.5  
Sending: $11=1766  
Sending: $13=69.85  
{“hostAddress”: “127.0.1.1:5000”}  
connected  
508955ee3f6544b9b102f4876552d7ef  
starting UI  
I’m connected!

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 2, 2020, 11:10pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/4 "2020-10-02T23:10:28Z")

</div>

My guess is that you need firmware version 51.26 or greater to use holey calibration and if that is what webcontrol is expecting based on your webcontrol.json config file, it will not work unless you either actions-\>upgrade to holey firmware or delete your config file and start totally fresh.

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 2, 2020, 11:24pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/5 "2020-10-02T23:24:49Z")

</div>

Thank you for the fast answer, tomorrow i will folow what you said

Regards

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 3, 2020, 1:28pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/6 "2020-10-03T13:28:20Z")

</div>

ok, now I have:  
Connected on port /dev/ttyACM0

I’m connected!  
Sending Board Data  
Sent Board Data  
Sending Board Cut Data compressed  
Sent Board Cut Data compressed  
FAKE\_SERVO off

Sending: B05  
WebControl 1.27  
Firmware Version 51.27

Sending: G21  
Sending: $$  
firmwareKeyString Exception: value = 800  
firmwareKeyString Exception: value = 17.018943  
firmwareKeyString Exception: value = 20  
Sending: $15=800  
Sending: $16=0.000000  
Sending: $29=1300.00  
Sending: $37=17.018943  
Sending: $42=20  
Sending: $45=0.00000516850  
Sending: $46=40.0000  
{“hostAddress”: “127.0.1.1:5000”}  
connected  
f294cf2477664e5b92d37de38781eff6  
I’m connected!

When I run he triangular calibration it said:

Sending: M3  
Sending: G0 X-966.0 Y+368.7  
Sending: G1 Z-7 F500  
found adjust Z-Axis in message  
at resume run with manualzaxisadjust = True  
‘Data’ object has no attribute ‘pausedUnits’  
at resume run with manualzaxisadjust = True  
‘Data’ object has no attribute ‘pausedUnits’

Paused units… what does it mean?

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 3, 2020, 1:57pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/7 "2020-10-03T13:57:01Z")

</div>

are you using a motorized z axis? if so, please set the z axis installed setting to TRUE in settings menu -\> maslow settings:

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/e/0/e01a2944a7af3c4fd3cda8c7dcb77cad22f999ad.png)

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 3, 2020, 2:23pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/8 "2020-10-03T14:23:10Z")

</div>

no, i dont have z axis and this value is in OFF…

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 3, 2020, 2:24pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/9 "2020-10-03T14:24:26Z")

</div>

It means there is an error in webcontrol with the manual z axis.

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 3, 2020, 2:31pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/10 "2020-10-03T14:31:50Z")

</div>

taking the adventage that you are here…  
I am calibrating in ground control now… and i have this error… what is happening?

 ![error](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/f/8/f810e9602e920a568850bef39bdd7827b4403e05.png)

I am begin to feel very very frustrated,

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 3, 2020, 4:25pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/11 "2020-10-03T16:25:40Z")

</div>

Ground control does not work with holey firmware, so you need to use webcontrol and flash bach your controller to version 1.26 or 1.27

---

<div class="post-metadata">

**Author:** ![Mario\_Giacummo](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mario_giacummo/32/12023_2.png) [@Mario\_Giacummo](https://forums.maslowcnc.com/u/Mario_Giacummo)\
**Post date:** [October 3, 2020, 9:21pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/12 "2020-10-03T21:21:18Z")

</div>

Ready, with ground control the things are running “quasi” smooth. I draw a pettern in the middle, middle top, middle bottom, left uo, mid, bottom… and is practicaly the same, very very little differences… so I can said Ground Control is ready. Y make a backup of the groundcontrol.ini file shutdown everything and here I am.

Now I want to run Webcontrol… if I understand what I read, I have to do the folowing:

- If I dont want to recalibrate anything, the only thing I have to do is IMPORT graoundcontrol.ini and thats all, it wil run like Groundcontrol
- if I want to refine the calibration, I just have to upgrade the Holyfirmware to the Arduino, and then run the holy calibration. question, which is the configuration file for webcontrol? defaultwebcontrol.json? can I backp it and restor it at any time? or I have to recalibrate with the restore?  
When I do a calibration process… the results of this calibration where are stored?

If something dont go good and I want to go back to groudcontrol, the process is:  
restore de groundcontrol.ini  
upgrade de stock firmware  
run de calibration process?.. it’s necesary?

thats all, just traying to understand where the things go, modify, restore, run, etc…

Best regards.

---

<div class="post-metadata">

**Author:** ![Orob](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/orob/32/16344_2.png) [@Orob](https://forums.maslowcnc.com/u/Orob)\
**Post date:** [October 3, 2020, 10:16pm UTC](https://forums.maslowcnc.com/t/webcontrol-51-27-controller-51-28/14825/13 "2020-10-03T22:16:46Z")

</div>

Yes that sounds correct. If you decide to go back to groundcontrol after webcontrol, the .in file from the original calibration will work still, but there is no way to move calibration information from webcontrol to groundcontrol. The webcontrol config file is webcontrol.json and is in the username/.webcontrol folder.
