# What Post Processor do you use with vCarve Pro and Maslow? **URL:** \ **Category:** Technical Details\ **Created:** [January 27, 2018, 1:37am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073 "2018-01-27T01:37:50Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![TITTIGER\_MASLOWCNC](https://avatars.discourse-cdn.com/v4/letter/t/b4bc9f/32.png) [@TITTIGER\_MASLOWCNC](https://forums.maslowcnc.com/u/TITTIGER_MASLOWCNC)\ **Post date:** [January 27, 2018, 1:37am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/1 "2018-01-27T01:37:50Z")
So we are Intelicam\_GCode\_Inch.pp (as per listed here: [https://github.com/MaslowCNC/GroundControl/wiki/CAM-(G-code-generation)-programs](https://github.com/MaslowCNC/GroundControl/wiki/CAM-(G-code-generation)-programs) But it’s not working. Is there one that works better? When the code loads o\in to ground control, it not to scale (meaning 24" is now 1") It’s not looking right. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [January 27, 2018, 2:25am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/2 "2018-01-27T02:25:10Z")
That sounds like a metric/inch error. I vCarve Pro not setting inches/metric? Try changing the mode of Ground Control and loading it ---
**Author:** ![Bryce](https://avatars.discourse-cdn.com/v4/letter/b/8edcca/32.png) [@Bryce](https://forums.maslowcnc.com/u/Bryce)\ **Post date:** [January 27, 2018, 3:15am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/3 "2018-01-27T03:15:52Z")
I think I had same trouble but save in .nc I just open the gcode in notepad and add g20 in as the first line to set the machine to inches Bryce ---
**Author:** ![TITTIGER\_MASLOWCNC](https://avatars.discourse-cdn.com/v4/letter/t/b4bc9f/32.png) [@TITTIGER\_MASLOWCNC](https://forums.maslowcnc.com/u/TITTIGER_MASLOWCNC)\ **Post date:** [January 27, 2018, 4:14pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/4 "2018-01-27T16:14:10Z")
> [@Bryce](#): > > g20 Thanks! Using G20 worked ---
**Author:** ![weaverrt](https://avatars.discourse-cdn.com/v4/letter/w/e36b37/32.png) [@weaverrt](https://forums.maslowcnc.com/u/weaverrt)\ **Post date:** [November 13, 2021, 12:25am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/5 "2021-11-13T00:25:36Z")
I’m considering Vcarve pro. As I go through the trial version, I notice there is a section where you can choose a machine from their list and a section where you can select your post prose or from a long list. I didn’t see Maslow, Makermade, or anything that links to the Maslow machine. What did you use that makes your setup work with the Maslow? I am using Makerverse with the M2. Any suggestions would be appreciated. Thanks! ---
**Author:** ![mooselake](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/mooselake/32/6218_2.png) [@mooselake](https://forums.maslowcnc.com/u/mooselake)\ **Post date:** [November 13, 2021, 1:23am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/6 "2021-11-13T01:23:11Z")
Use the grbl post processer ---
**Author:** ![jjseabra](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jjseabra](https://forums.maslowcnc.com/u/jjseabra)\ **Post date:** [April 27, 2024, 5:40pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/7 "2024-04-27T17:40:06Z")
Has anyone successfully used a post processor from aspire to makerverse? If so what processor did you use? ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [April 27, 2024, 6:11pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/8 "2024-04-27T18:11:12Z")
Joseph wrote: > Has anyone successfully used a post processor from aspire to makerverse? If so what processor did you use? it is expected that the grbl post processor will work for the maslow 4 David Lang ---
**Author:** ![jjseabra](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jjseabra](https://forums.maslowcnc.com/u/jjseabra)\ **Post date:** [April 27, 2024, 8:28pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/9 "2024-04-27T20:28:04Z")
It does not. I tried it, imported it into makerverse and it was so small I could barely see it. ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [April 27, 2024, 8:59pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/10 "2024-04-27T20:59:32Z")
an i ches vs mm problem? ---
**Author:** ![jjseabra](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jjseabra](https://forums.maslowcnc.com/u/jjseabra)\ **Post date:** [April 27, 2024, 9:22pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/11 "2024-04-27T21:22:57Z")
My file keeps showing up off the page. ---
**Author:** ![Spider](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/spider/32/31701_2.png) [@Spider](https://forums.maslowcnc.com/u/Spider)\ **Post date:** [August 1, 2026, 9:53am UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/12 "2026-08-01T09:53:06Z")
I am new to Maslow I use aspire for my other ball screw CNC What post prosesor would work best from aspire 2d on Maslow ? ---
**Author:** ![dlang](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/dlang/32/859_2.png) [@dlang](https://forums.maslowcnc.com/u/dlang)\ **Post date:** [August 1, 2026, 12:27pm UTC](https://forums.maslowcnc.com/t/what-post-processor-do-you-use-with-vcarve-pro-and-maslow/2073/13 "2026-08-01T12:27:41Z")
Spider wrote: > I use aspire for my other ball screw CNC > > What post prosesor would work best from aspire 2d on Maslow ? GRBL will work, but you need to disable any homing commands that it puts in (G28 is one) David Lang