# Which Router for a germany based build?

**URL:** <https://forums.maslowcnc.com/t/which-router-for-a-germany-based-build/7848>\
**Category:** No Judgement\
**Created:** [November 26, 2018, 11:59am UTC](https://forums.maslowcnc.com/t/which-router-for-a-germany-based-build/7848 "2018-11-26T11:59:30Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [November 26, 2018, 12:28pm UTC](https://forums.maslowcnc.com/t/which-router-for-a-germany-based-build/7848/2 "2018-11-26T12:28:42Z")

</div>

> [@GPSchnyder](#):
>
> Maslow Kit in the nearer future

Welcome to the Forum!  
What router you get depends on the kit you buy. Are you favouring one?  
1 kit allows the use of a makita RT0701 or similar router and even a spindle because of the use of a c-beam for Z-moves.  
The Bosch POF 1200 is used quite a lot as an other option:

> [@Bosch POF 1200 z-axis conversion guide](https://forums.maslowcnc.com/t/bosch-pof-1200-z-axis-conversion-guide/5154):
>
> This is the guide to convert your Bosch POF 1200 (or POF 1400) to fit in the ring, and to accept a z-axis. If you’re using a linkage kit, like @dlang 's you don’t need to cut off the handles. You can find the files to [print your own over here](https://forums.maslowcnc.com/t/bosch-pof-1200-ae-height-adjust-modifications/1900) Remove the screw… Pry off the clip with a screwdriver… Remove 4 screws and take off the top cap… Remove blue wire connections from both sides… Remove 4 …

---

_[View the full topic](https://forums.maslowcnc.com/t/which-router-for-a-germany-based-build/7848)._
