# Working with FluidNC / Maslow4

**URL:** <https://forums.maslowcnc.com/t/working-with-fluidnc-maslow4/20705>\
**Category:** Software\
**Created:** [April 17, 2024, 8:32pm UTC](https://forums.maslowcnc.com/t/working-with-fluidnc-maslow4/20705 "2024-04-17T20:32:37Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Sylvain\_Dorais](https://avatars.discourse-cdn.com/v4/letter/s/90ced4/32.png) [@Sylvain\_Dorais](https://forums.maslowcnc.com/u/Sylvain_Dorais)\
**Post date:** [April 19, 2024, 10:50pm UTC](https://forums.maslowcnc.com/t/working-with-fluidnc-maslow4/20705/6 "2024-04-19T22:50:26Z")

</div>

Ok, Thanks for the hard work, you get to it when you get to it!

In the meantime, I have not taken on large project, but I did cut this cap for the vacuum, thanks to the person who put the dust collector in the not shop, I just stripped the bottom layer off of it, modified and cut a wooden cap (wish I had a piece of plexi) to go with a shop vac adaptor I had sitting around! Drawing was perfect, so was the cut, everything aligned nicely!

Cheers

If anyone wants the Cap DXF, let me know

 ![M4 cap](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/3X/4/6/46a59ae39139bb8929f16ebdbb08ea6e59f4875a.jpeg)

---

_[View the full topic](https://forums.maslowcnc.com/t/working-with-fluidnc-maslow4/20705)._
