# Working with large work areas

**URL:** <https://forums.maslowcnc.com/t/working-with-large-work-areas/25817>\
**Category:** Technical Details\
**Created:** [May 28, 2026, 1:51pm UTC](https://forums.maslowcnc.com/t/working-with-large-work-areas/25817 "2026-05-28T13:51:36Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Tore](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/tore/32/25202_2.png) [@Tore](https://forums.maslowcnc.com/u/Tore)\
**Post date:** [May 28, 2026, 2:01pm UTC](https://forums.maslowcnc.com/t/working-with-large-work-areas/25817/2 "2026-05-28T14:01:29Z")

</div>

You would need to extend the belts from the anchor points on the frame. There is a setting for putting in extensions I believe.

I haven’t done it myself, but check out this post for connecting with someone that has:

[Added 1 Metre Extension to all belts and went back to Horizontal](https://forums.maslowcnc.com/t/added-1-metre-extension-to-all-belts-and-went-back-to-horizontal/24717)

---

_[View the full topic](https://forums.maslowcnc.com/t/working-with-large-work-areas/25817)._