# Yellow Maslow Shields v1.14b
**URL:** https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103
**Category:** Electronics
**Created:** [May 27, 2018, 6:01pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103 "2018-05-27T18:01:18Z")
**Posts on this page:** 15
**Page:** 1
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [May 27, 2018, 6:01pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/1 "2018-05-27T18:01:18Z")
Added 12v headers with a friends help (thx Harry). I have to build and test it still. If it’s good I’ll make a bulk order.
I did this because I use 12V cooling fans.
Thank you
---
### Author:  [@Dru](https://forums.maslowcnc.com/u/Dru)
#### Post date: [May 27, 2018, 7:04pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/2 "2018-05-27T19:04:52Z")
Ill take one when your are happy with the testing
Welldone
---
### Author:  [@blurfl](https://forums.maslowcnc.com/u/blurfl)
#### Post date: [May 27, 2018, 7:27pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/3 "2018-05-27T19:27:37Z")
I’m not certain of its placement, but before you have those boards made, check that the new header will clear the USB connector of the Mega underneath.
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [May 27, 2018, 7:29pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/4 "2018-05-27T19:29:08Z")
Thanks will do. My buddy has the boards and I have a road trip coming up as soon as I test it I will post here.
Thank you
---
### Author:  [@blurfl](https://forums.maslowcnc.com/u/blurfl)
#### Post date: [May 27, 2018, 7:30pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/5 "2018-05-27T19:30:42Z")
Voice of experience, I had some boards made that had that issue in the same place 😉
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [May 28, 2018, 12:07am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/6 "2018-05-28T00:07:58Z")
FWW - I hav had several people over the years suggest a shield under the shield over the USB port. I typically use a peice of tape over the top of the USB port to avoid the issue no matter what shield is used.
Thank you
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [June 10, 2018, 2:50am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/7 "2018-06-10T02:50:14Z")
Populated board running 12v fan on added 12v bus.
Dumb roll …
It’s alive!
Thank you
---
### Author:  [@blurfl](https://forums.maslowcnc.com/u/blurfl)
#### Post date: [June 10, 2018, 2:54am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/8 "2018-06-10T02:54:01Z")
👍🏻It’s a good feeling, isn’t it!
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [June 10, 2018, 2:58am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/9 "2018-06-10T02:58:48Z")
Oh Man! - I couldn’t have gotten here without your help and my buddy Harry.
Many Thanks
---
### Author:  [@Carpinteria\_Yenes](https://forums.maslowcnc.com/u/Carpinteria_Yenes)
#### Post date: [June 28, 2018, 9:00pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/10 "2018-06-28T21:00:59Z")
Hello Bee, I´ve been talking with Gero, he has recommended me that I talk with you about the board TLE5206, I have decided set the Maslow with this board, can you help me with that?.
have you got some more of that boards? or do you know how to get it?
Thanks in advance
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [June 28, 2018, 10:50pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/11 "2018-06-28T22:50:54Z")
I will help you - I will be making some new boards soon - I have the parts in shopping cart as we speak.
Do you have an account at:
[https://www.disciplesofcnc.com/](https://www.disciplesofcnc.com/)
If not please sign up and provide your address on your account there.
Thank you
---
### Author:  [@Carpinteria\_Yenes](https://forums.maslowcnc.com/u/Carpinteria_Yenes)
#### Post date: [June 29, 2018, 6:34am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/12 "2018-06-29T06:34:45Z")
Thank you Brandon, I´ve already sign up to that page, you will tell me what i do now
---
### Author:  [@mrfugu](https://forums.maslowcnc.com/u/mrfugu)
#### Post date: [June 29, 2018, 11:09am UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/13 "2018-06-29T11:09:36Z")
hey, I just registered to get in on the next batch of 1.14 shields. lemme know when they’re ready!
thanks!
---
### Author:  [@andgott](https://forums.maslowcnc.com/u/andgott)
#### Post date: [August 17, 2018, 11:02pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/14 "2018-08-17T23:02:55Z")
Are these boards available? Do you have a parts list (or sell the components) ? Thanks
---
### Author:  [@Bee](https://forums.maslowcnc.com/u/Bee)
#### Post date: [August 17, 2018, 11:06pm UTC](https://forums.maslowcnc.com/t/yellow-maslow-shields-v1-14b/4103/15 "2018-08-17T23:06:30Z")
Please see the thread here:
> [@The Blue Smoke Herder Shield - AKA the New Maslow Shield (TLE5206)](https://forums.maslowcnc.com/t/the-blue-smoke-herder-shield-aka-the-new-maslow-shield-tle5206/5322):
>
> BSHS - What the Heck is a Blue Smoke Herder? In a discussion with the first person to request a Shield form me. @Dru Mentioned letting the Blue Smoke out of his original Maslow Shield. For anyone unaware it’s a Maker term for the death of an electronic device. Me and my friend Harry altered the design of the TLE5206 shield from @blurfl to include 12v power headers to run fans. I have 5 boards from what I will call V1 that are ready to populate. I ordered 30 more of what I will call V2. …
Thank you