# Yet Another Z Axis Mod

**URL:** <https://forums.maslowcnc.com/t/yet-another-z-axis-mod/7359>\
**Category:** Maslow Community\
**Created:** [October 20, 2018, 12:06pm UTC](https://forums.maslowcnc.com/t/yet-another-z-axis-mod/7359 "2018-10-20T12:06:49Z")\
**Posts on this page:** 1\
**Showing post:** 80

<div class="post-metadata">

**Author:** ![Superbender](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/superbender/32/10323_2.png) [@Superbender](https://forums.maslowcnc.com/u/Superbender)\
**Post date:** [May 14, 2019, 3:08pm UTC](https://forums.maslowcnc.com/t/yet-another-z-axis-mod/7359/80 "2019-05-14T15:08:13Z")

</div>

I now implemented the automated z-axis adjustment.  
That addition makes things way easier and there is no need to see the bit during z-axis zeroing anymore.  
Awesome.  
[Here is one of the threads that I used.](https://forums.maslowcnc.com/t/automating-z-axis-zeroing/5886)

---

_[View the full topic](https://forums.maslowcnc.com/t/yet-another-z-axis-mod/7359)._