# YetiTool SmartBench - Raspberry Pi
**URL:** https://forums.maslowcnc.com/t/yetitool-smartbench-raspberry-pi/22640
**Category:** Found and Shared
**Created:** [November 6, 2024, 1:51pm UTC](https://forums.maslowcnc.com/t/yetitool-smartbench-raspberry-pi/22640 "2024-11-06T13:51:40Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Pedro\_24](https://forums.maslowcnc.com/u/Pedro_24)
#### Post date: [November 6, 2024, 1:51pm UTC](https://forums.maslowcnc.com/t/yetitool-smartbench-raspberry-pi/22640/1 "2024-11-06T13:51:40Z")
Hello, I hope you are well.
I have a CNC machine from the company YetiTool, which I bought a Raspberry and put the operating system that came to me on the original Raspberry, because it broke, I transferred it to a new Raspberry and it doesn’t give an image, the screen stays blank. black, however in the old one it did give an image and worked, in fact if I try it the original works but since it had a problem I can’t use it now.
What could it be that the image remains black?
---
### Author:  [@bar](https://forums.maslowcnc.com/u/bar)
#### Post date: [November 6, 2024, 5:37pm UTC](https://forums.maslowcnc.com/t/yetitool-smartbench-raspberry-pi/22640/2 "2024-11-06T17:37:55Z")
Unfortunately that machine is made by a different company (YetiTool) so I think that you will need to post in their forums to get a good answer 😛