# Z-Axis Motor Wiring

**URL:** <https://forums.maslowcnc.com/t/z-axis-motor-wiring/2017>\
**Category:** Hardware\
**Created:** [January 22, 2018, 6:18pm UTC](https://forums.maslowcnc.com/t/z-axis-motor-wiring/2017 "2018-01-22T18:18:53Z")\
**Posts on this page:** 1\
**Showing post:** 81

<div class="post-metadata">

**Author:** ![ChrisB](https://avatars.discourse-cdn.com/v4/letter/c/b38774/32.png) [@ChrisB](https://forums.maslowcnc.com/u/ChrisB)\
**Post date:** [August 13, 2018, 12:56am UTC](https://forums.maslowcnc.com/t/z-axis-motor-wiring/2017/81 "2018-08-13T00:56:48Z")

</div>

![Maslow%20131%20Encoder%202](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/5/5b68af2f01293e7b5202f8a931607ff930e6bb92.jpeg) ![Maslow%20131%20Encoder](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/c/c5de809e569e929bb2182483faf0f76f1ed966da.jpeg) ![Maslow%20131%20Encoder%201](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/b/bdd988be3766b334fc6ea05c53e083b3d1964c26.jpeg)

Here are some pictures from the encoder, I was dumb and tried to just pull the pins out of the connector on the new motor but then I realized they were soldered and so I had to just solder the Maslow ones onto the new motor.

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-motor-wiring/2017)._