# Z Axis on suggested Rigid Router

**URL:** <https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575>\
**Category:** Hardware\
**Created:** [December 18, 2017, 10:24pm UTC](https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575 "2017-12-18T22:24:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcourrier](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jcourrier/32/19637_2.png) [@jcourrier](https://forums.maslowcnc.com/u/jcourrier)\
**Post date:** [December 18, 2017, 10:24pm UTC](https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575/1 "2017-12-18T22:24:54Z")

</div>

I noticed while working with the maslow, that sometimes the router doesn’t return to the appropriate height after a Z axis raise and lower sequence, instead of having to watch the entire cut sequence i thought of putting some sort of spring or something then I had a stroke of redneck engineering genius…

I used 3 Hair Ties and it seems to be working great! no return problems what so ever.

 ![20171218_160232[1]](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/1/1b3a6e907107b18a734a6b9cc9e10e610211138d.jpg)

 ![20171218_160224[1]](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/2/272305eebbc8dab1f43fcf13678f986c955efe58.jpg)

---

<div class="post-metadata">

**Author:** ![Jayster](https://avatars.discourse-cdn.com/v4/letter/j/d78d45/32.png) [@Jayster](https://forums.maslowcnc.com/u/Jayster)\
**Post date:** [December 19, 2017, 4:46am UTC](https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575/2 "2017-12-19T04:46:00Z")

</div>

Looks like that works. See here for more info: [Z-Axis Bungee To Ensure Correct Depth](https://forums.maslowcnc.com/t/z-axis-bungee-to-ensure-correct-depth/481)

---

<div class="post-metadata">

**Author:** ![jcourrier](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/jcourrier/32/19637_2.png) [@jcourrier](https://forums.maslowcnc.com/u/jcourrier)\
**Post date:** [December 19, 2017, 12:10pm UTC](https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575/3 "2017-12-19T12:10:01Z")

</div>

I should have known someone else had already came up with something already, thank you very much @Jayster

---

<div class="post-metadata">

**Author:** ![Bee](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bee/32/2160_2.png) [@Bee](https://forums.maslowcnc.com/u/Bee)\
**Post date:** [December 19, 2017, 8:20pm UTC](https://forums.maslowcnc.com/t/z-axis-on-suggested-rigid-router/1575/4 "2017-12-19T20:20:59Z")

</div>

I’ll be making a version a little different too. @Jayster Thanks for the link. It will get me using the Maslow before needing to get my design done. I want a few more options for connecting but I have to say the 3 hairbands is pretty clean. I haven’t had hair long enough to need them for a hand full of years now.

Thank you
