# Z axis only moving the router some of the time

**URL:** <https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133>\
**Category:** Hardware\
**Created:** [July 20, 2017, 3:04pm UTC](https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133 "2017-07-20T15:04:16Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\
**Post date:** [July 20, 2017, 4:21pm UTC](https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133/4 "2017-07-20T16:21:07Z")

</div>

@paulinus, i’ve had that problem too. You’re right about the orange button, it follows the threads and will be damaged if the router body doesn’t slide with it. In my case, my z-axis ran away when I was testing some software, and ran into the end stop. The orange button sacrifices itself 🙂  
They are not expensive, I bought a couple so I would be ‘ready for next time’…

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133)._
