# Z-axis question for Rigid 22002 router - software setting

**URL:** <https://forums.maslowcnc.com/t/z-axis-question-for-rigid-22002-router-software-setting/4805>\
**Category:** Routers/Spindles\
**Created:** [July 12, 2018, 1:46pm UTC](https://forums.maslowcnc.com/t/z-axis-question-for-rigid-22002-router-software-setting/4805 "2018-07-12T13:46:28Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![blurfl](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/blurfl/32/9_2.png) [@blurfl](https://forums.maslowcnc.com/u/blurfl)\
**Post date:** [July 12, 2018, 2:39pm UTC](https://forums.maslowcnc.com/t/z-axis-question-for-rigid-22002-router-software-setting/4805/2 "2018-07-12T14:39:28Z")

</div>

The Ridgid 22002 moves 3.175mm (.125" ) for each turn of the depth screw, and can be made pretty accurate.

Not sure what situation you’re seeing, but here are are some threads that might touch on it:

> [@Z-Axis Bungee To Ensure Correct Depth](https://forums.maslowcnc.com/t/z-axis-bungee-to-ensure-correct-depth/481):
>
> I was noticing that the router was not always plunging to the depth it should when the Z-Axis moved. When I would push on the top of the router it would drop to the correct level, and getting that bolt on the plunge lock at the exact tightness was a pain. I added some small bungees around the handles, and over the top of the router and the tension pushing towards the work surface is enough to ensure the router plunges at the given depth. Photo:

[http://maslowcommunitygarden.org/Inexpensive-add-ons-for-z-axis-slack-imprecision.html](http://maslowcommunitygarden.org/Inexpensive-add-ons-for-z-axis-slack-imprecision.html)

> [@Z axis only moving the router some of the time](https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133/4):
>
> @paulinus, i’ve had that problem too. You’re right about the orange button, it follows the threads and will be damaged if the router body doesn’t slide with it. In my case, my z-axis ran away when I was testing some software, and ran into the end stop. The orange button sacrifices itself slight_smile They are not expensive, I bought a couple so I would be ‘ready for next time’…

> [@Z-Axis Zero changes when Circular Sled is Started](https://forums.maslowcnc.com/t/z-axis-zero-changes-when-circular-sled-is-started/4107/9):
>
> The .nc file sure looks proper. Have you checked mechanical things like the set screws? If yours is a Ridgid router, check the orange ‘goodie’ - I had a spate of mysteriouis z-axis trouble after running mine into the stops a while back, which damaged that part, see [the discussion here](https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133). It is a cheap ($1) part, but often slow to ship. I bought several to be prepared for the next time.

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-question-for-rigid-22002-router-software-setting/4805)._
