# Z-Axis upgrades Consolidation

**URL:** <https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392>\
**Category:** Hardware\
**Tags:** z-axis\
**Created:** [August 2, 2018, 2:45pm UTC](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392 "2018-08-02T14:45:45Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Maslonians207](https://avatars.discourse-cdn.com/v4/letter/m/b782af/32.png) [@Maslonians207](https://forums.maslowcnc.com/u/Maslonians207)\
**Post date:** [September 13, 2018, 2:29pm UTC](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392/11 "2018-09-13T14:29:08Z")

</div>

I’m looking at this one:

> [@Z axis upgrade is almost ready for prime time!](https://forums.maslowcnc.com/t/z-axis-upgrade-is-almost-ready-for-prime-time/1649):
>
> I finally received the $50 rail slider and was able to design a small footprint z-axis that fits within the footprint of the original sled design. I also added both kinematics hole patterns to the sled for easier testing.[Sled R3 upgrade.dxf](https://forums.maslowcnc.com/uploads/maslowcnc/original/2X/b/bf943f0b535b16fc290849fa3518372c216fc815.dxf) (403.9 KB)

Which has a bunch of info and links but I got confused looking at it all the options and discussion with terms I’m not 100% sure on what they are.

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392)._