# Z-Axis upgrades Consolidation

**URL:** <https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392>\
**Category:** Hardware\
**Tags:** z-axis\
**Created:** [August 2, 2018, 2:45pm UTC](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392 "2018-08-02T14:45:45Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Gero](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/gero/32/17487_2.png) [@Gero](https://forums.maslowcnc.com/u/Gero)\
**Post date:** [September 13, 2018, 2:37pm UTC](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392/13 "2018-09-13T14:37:08Z")

</div>

With the original motor with belt gear must be in this post [The Meticulous Z-Axis](https://forums.maslowcnc.com/t/the-meticulous-z-axis/3319/106)  
If you haven’t already it’s worth to go through as much info is valuable for the Cbeam also.  
My approach for the upgrade will roughly look like this, but with a spindle.

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/maslowcnc/original/2X/3/390a995be82d01dc891da6b7ce7167965fd96861.png)

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-upgrades-consolidation/5392)._