# Z-Axis Zero changes when Circular Sled is Started

**URL:** <https://forums.maslowcnc.com/t/z-axis-zero-changes-when-circular-sled-is-started/4107>\
**Category:** Troubleshooting\
**Created:** [May 27, 2018, 7:21pm UTC](https://forums.maslowcnc.com/t/z-axis-zero-changes-when-circular-sled-is-started/4107 "2018-05-27T19:21:19Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![eightlines](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/eightlines/32/5862_2.png) [@eightlines](https://forums.maslowcnc.com/u/eightlines)\
**Post date:** [May 29, 2018, 3:31pm UTC](https://forums.maslowcnc.com/t/z-axis-zero-changes-when-circular-sled-is-started/4107/10 "2018-05-29T15:31:44Z")

</div>

@blurfl This is the issue I was working through on the weekend. [Z Depth + Ridgid Problems [RESOLVED]](https://forums.maslowcnc.com/t/z-depth-ridgid-problems-resolved/4030/10) Since resolving this I’m pretty sure the Z movement is correct.

---

_[View the full topic](https://forums.maslowcnc.com/t/z-axis-zero-changes-when-circular-sled-is-started/4107)._