# Z Depth + Ridgid Problems \[RESOLVED\]

**URL:** <https://forums.maslowcnc.com/t/z-depth-ridgid-problems-resolved/4030>\
**Category:** No Judgement\
**Created:** [May 22, 2018, 6:21pm UTC](https://forums.maslowcnc.com/t/z-depth-ridgid-problems-resolved/4030 "2018-05-22T18:21:27Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![eightlines](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/eightlines/32/5862_2.png) [@eightlines](https://forums.maslowcnc.com/u/eightlines)\
**Post date:** [May 26, 2018, 3:43pm UTC](https://forums.maslowcnc.com/t/z-depth-ridgid-problems-resolved/4030/12 "2018-05-26T15:43:26Z")

</div>

Ok, filed down the anti-rotation channel, greased the housing, added a washer in the worm gear assembly, and tightened the housing clamp to be as tight as possible but still let the router slide. Managed to get the z-axis to slide up and down about 20 times without issue. Thanks everyone for your suggestions!

---

_[View the full topic](https://forums.maslowcnc.com/t/z-depth-ridgid-problems-resolved/4030)._