# Z offset and location of belt loop on anchor

**URL:** <https://forums.maslowcnc.com/t/z-offset-and-location-of-belt-loop-on-anchor/24362>\
**Category:** Troubleshooting\
**Created:** [June 12, 2025, 8:10pm UTC](https://forums.maslowcnc.com/t/z-offset-and-location-of-belt-loop-on-anchor/24362 "2025-06-12T20:10:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bar](https://yyz1.discourse-cdn.com/flex031/user_avatar/forums.maslowcnc.com/bar/32/10_2.png) [@bar](https://forums.maslowcnc.com/u/bar)\
**Post date:** [June 12, 2025, 8:47pm UTC](https://forums.maslowcnc.com/t/z-offset-and-location-of-belt-loop-on-anchor/24362/2 "2025-06-12T20:47:42Z")

</div>

> [@Allen1](#):
>
> Or should each belt be at the exact same location on the anchor?

The way the math works now is that the machine expects them to all be at the same height.

---

_[View the full topic](https://forums.maslowcnc.com/t/z-offset-and-location-of-belt-loop-on-anchor/24362)._