# \#troubleshoot **URL:** https://forums.maslowcnc.com/tag/troubleshoot/23.md [Latest](https://forums.maslowcnc.com/latest.md) · [Categories](https://forums.maslowcnc.com/categories.md) · [Tags](https://forums.maslowcnc.com/tags.md) --- ## [V carve cam setup questions](https://forums.maslowcnc.com/t/v-carve-cam-setup-questions/26172)
**Author:** [@wouldchuck](https://forums.maslowcnc.com/u/wouldchuck)\ **Replies:** 7\ **Last updated:** [September 1, 2026, 10:36pm UTC](https://forums.maslowcnc.com/t/v-carve-cam-setup-questions/26172 "2026-09-01T22:36:56Z")
Trying to use a 60 degree v bit. Starting with an svg in inkscape, brought it over to Krabzcam. Used the V pocket operation to try to trim in around the edges of the text and images then I would plan to use a flat pock… --- ## [Practical? Effective? Reliable? Have you been able to use Maslow 4 for several projects?](https://forums.maslowcnc.com/t/practical-effective-reliable-have-you-been-able-to-use-maslow-4-for-several-projects/23688)
**Author:** [@MikeHogan](https://forums.maslowcnc.com/u/MikeHogan)\ **Replies:** 17\ **Last updated:** [November 24, 2025, 11:40pm UTC](https://forums.maslowcnc.com/t/practical-effective-reliable-have-you-been-able-to-use-maslow-4-for-several-projects/23688 "2025-11-24T23:40:38Z")
Has your build of Maslow 4 resulted in a demonstrated ability to cut multiple projects? I’m especially interested in Super-User experience (such as Bar or Anna). Once you have the system put together and calibrated, ha… --- ## [Problems with arm motor](https://forums.maslowcnc.com/t/problems-with-arm-motor/24437)
**Author:** [@Haytham\_Althawabi](https://forums.maslowcnc.com/u/Haytham_Althawabi)\ **Replies:** 4\ **Last updated:** [June 25, 2025, 11:18pm UTC](https://forums.maslowcnc.com/t/problems-with-arm-motor/24437 "2025-06-25T23:18:59Z")
Hi everyone, I ran into a issue with one of the arm motors. It’s my first proper run and halfway through one of the motors started rotating of it’s own base. Please, any help on this issue or has anyone else run into a … --- ## [Gcode/Program stops and disappears soon after the first cut](https://forums.maslowcnc.com/t/gcode-program-stops-and-disappears-soon-after-the-first-cut/17264)
**Author:** [@Wes](https://forums.maslowcnc.com/u/Wes)\ **Replies:** 2\ **Last updated:** [October 25, 2021, 2:23pm UTC](https://forums.maslowcnc.com/t/gcode-program-stops-and-disappears-soon-after-the-first-cut/17264 "2021-10-25T14:23:02Z")
I’ve used the M2 Maslow for 8 different projects and for the most part I haven’t had any issues. But now, it will not cut whatsoever. Here’s what happens: I boot up the maslowverse software and check calibration. I alway… --- ## [Gcode won't go under 2mm after using touch plate](https://forums.maslowcnc.com/t/gcode-wont-go-under-2mm-after-using-touch-plate/16659)
**Author:** [@Johnjohnjohn3](https://forums.maslowcnc.com/u/Johnjohnjohn3)\ **Replies:** 5\ **Last updated:** [May 21, 2021, 9:19pm UTC](https://forums.maslowcnc.com/t/gcode-wont-go-under-2mm-after-using-touch-plate/16659 "2021-05-21T21:19:45Z")
Hi Yall, I need some help with the z probing. I enabled use of Touch Plates in Web control and it appeared to work perfectly. The z axis goes down touches and sets a great zero. Unfortunately after using the touch fea… --- ## [Fully Adjustable Storage Dresser, Designed in FreeCAD](https://forums.maslowcnc.com/t/fully-adjustable-storage-dresser-designed-in-freecad/11906)
**Author:** [@ivxcvi](https://forums.maslowcnc.com/u/ivxcvi)\ **Replies:** 1\ **Last updated:** [December 6, 2020, 12:19am UTC](https://forums.maslowcnc.com/t/fully-adjustable-storage-dresser-designed-in-freecad/11906 "2020-12-06T00:19:20Z")
Hello, Over a majority of the last month I’ve been trying to model up a dresser for some additional storage. This project has, over this time, suffered from (blossomed into?) feature creep. It’s at this point that I … --- ## [Burnt out motor or shield?](https://forums.maslowcnc.com/t/burnt-out-motor-or-shield/11387)
**Author:** [@anvil](https://forums.maslowcnc.com/u/anvil)\ **Replies:** 8\ **Last updated:** [October 21, 2019, 11:51am UTC](https://forums.maslowcnc.com/t/burnt-out-motor-or-shield/11387 "2019-10-21T11:51:23Z")
So i went through my normal calibration process with heavier weights (10lbs) because my earlier weights weren’t heavy enough to suspend the chain because I lost one of those little sprockets that attach to the bungee cor… --- ## [First Project Issues: Z-Axis, Edge Burning, Bit Dulling](https://forums.maslowcnc.com/t/first-project-issues-z-axis-edge-burning-bit-dulling/6809)
**Author:** [@theHipNerd](https://forums.maslowcnc.com/u/theHipNerd)\ **Replies:** 17\ **Last updated:** [September 23, 2018, 11:05pm UTC](https://forums.maslowcnc.com/t/first-project-issues-z-axis-edge-burning-bit-dulling/6809 "2018-09-23T23:05:12Z")
Hello, Maslowvians, I come in peace, and looking for help with my first project. Here’s a picture of my most successful test to date: Here’s one of the problems I’m having: The pattern is cut starting at the left … --- ## [Troubleshooting Category (vote closed)](https://forums.maslowcnc.com/t/troubleshooting-category-vote-closed/1780)
**Author:** [@Gero](https://forums.maslowcnc.com/u/Gero)\ **Replies:** 1\ **Last updated:** [January 11, 2018, 3:40pm UTC](https://forums.maslowcnc.com/t/troubleshooting-category-vote-closed/1780 "2018-01-11T15:40:27Z")
The Category -\> Software \<- has the ‘About’ pinned at the bottom, but I could find it and it says: "Issues pertaining to the software supporting Maslow should be posted here. Ground Control and the Maslow Firmware are d…