# \#z-axis **URL:** https://forums.maslowcnc.com/tag/z-axis/42.md [Latest](https://forums.maslowcnc.com/latest.md) · [Categories](https://forums.maslowcnc.com/categories.md) · [Tags](https://forums.maslowcnc.com/tags.md) --- ## [Instructions - How To Make And Set Up A Z-Probe On The M4](https://forums.maslowcnc.com/t/instructions-how-to-make-and-set-up-a-z-probe-on-the-m4/22474)
**Author:** [@Andith](https://forums.maslowcnc.com/u/Andith)\ **Replies:** 54\ **Last updated:** [August 27, 2026, 4:26am UTC](https://forums.maslowcnc.com/t/instructions-how-to-make-and-set-up-a-z-probe-on-the-m4/22474 "2026-08-27T04:26:45Z")
(UPDATED 2024.11.13 FOR FIRMWARE V0.85 CHANGES) A z-probe is a super handy addition to your M4 allowing you to accurately and quickly set the z-home position of your router bit on top of your material anytime that you a… --- ## [Z-Motor (and other motor) intermittency](https://forums.maslowcnc.com/t/z-motor-and-other-motor-intermittency/26115)
**Author:** [@ragamufin](https://forums.maslowcnc.com/u/ragamufin)\ **Replies:** 5\ **Last updated:** [August 17, 2026, 4:32am UTC](https://forums.maslowcnc.com/t/z-motor-and-other-motor-intermittency/26115 "2026-08-17T04:32:30Z")
Hello All, Had my eye on this machine for a few years and finally picked up a used 4.1 kit last week. I have a fair bit of experience with gantry machines but this is my first belt/chain driven CNC. Setup went great wi… --- ## [\[MSG:ERR: Invalid setting or command: /Maslow\_Calibration\_Current\_Threshold\]](https://forums.maslowcnc.com/t/msg-invalid-setting-or-command-maslow-calibration-current-threshold/25492)
**Author:** [@Rob\_Jax](https://forums.maslowcnc.com/u/Rob_Jax)\ **Replies:** 20\ **Last updated:** [July 4, 2026, 11:43am UTC](https://forums.maslowcnc.com/t/msg-invalid-setting-or-command-maslow-calibration-current-threshold/25492 "2026-07-04T11:43:03Z")
I just built my machine and plugged it in here at my desk. I am able to TEST, RETRACT and EXTEND. I am not able to move my z axis. The motors do activate and make a noise but, I have no movement. Any suggestions. --- ## [Stepper motor problem](https://forums.maslowcnc.com/t/stepper-motor-problem/25906)
**Author:** [@ThomasB](https://forums.maslowcnc.com/u/ThomasB)\ **Replies:** 2\ **Last updated:** [June 12, 2026, 5:14pm UTC](https://forums.maslowcnc.com/t/stepper-motor-problem/25906 "2026-06-12T17:14:38Z")
One of the stepper motors fails. If I switch the two cables, the other one fails. So probably a problem with one of the two stepper motor drivers. I changed the run amps to 1.3 amps, but that didnt solve the problem. --- ## [Z axis unresponsive](https://forums.maslowcnc.com/t/z-axis-unresponsive/25674)
**Author:** [@AREA15TECH](https://forums.maslowcnc.com/u/AREA15TECH)\ **Replies:** 14\ **Last updated:** [June 12, 2026, 2:17am UTC](https://forums.maslowcnc.com/t/z-axis-unresponsive/25674 "2026-06-12T02:17:59Z")
Brand new 4.1 kit was assembled and connected just fine. I can extend and retract the belts no problem but when I attempt to jog the z axis, the fan comes on momentarily, and both stepper motors lock up for the duration … --- ## [Initial set up and calibration](https://forums.maslowcnc.com/t/initial-set-up-and-calibration/25676)
**Author:** [@Bones](https://forums.maslowcnc.com/u/Bones)\ **Replies:** 159\ **Last updated:** [May 27, 2026, 3:23am UTC](https://forums.maslowcnc.com/t/initial-set-up-and-calibration/25676 "2026-05-27T03:23:59Z")
I received my 4.1 about 3 weeks ago and immediately started the assembly and set-up. First try was anchored to the floor and tried to run calibration, failed. I built an 8x10 frame to run it at 30 degree horizontal and t… --- ## [Ordered 4.1 on kickstarter - cannot get board to recognize a Z motor on one port](https://forums.maslowcnc.com/t/ordered-4-1-on-kickstarter-cannot-get-board-to-recognize-a-z-motor-on-one-port/24995)
**Author:** [@Chris\_Morley](https://forums.maslowcnc.com/u/Chris_Morley)\ **Replies:** 3\ **Last updated:** [May 26, 2026, 5:56pm UTC](https://forums.maslowcnc.com/t/ordered-4-1-on-kickstarter-cannot-get-board-to-recognize-a-z-motor-on-one-port/24995 "2026-05-26T17:56:32Z")
Hello Maslow team, I’m finally getting around to setting up my Maslow 4.1 from the Kickstarter campaign — I had some personal life stuff that delayed the build, but I’m excited to get started now. Unfortunately, I’m ru… --- ## [Z-axis motor setup set pin not great](https://forums.maslowcnc.com/t/z-axis-motor-setup-set-pin-not-great/25765)
**Author:** [@brynja](https://forums.maslowcnc.com/u/brynja)\ **Replies:** 4\ **Last updated:** [May 12, 2026, 3:24am UTC](https://forums.maslowcnc.com/t/z-axis-motor-setup-set-pin-not-great/25765 "2026-05-12T03:24:37Z")
I have the Maslow CNC kit from Makermade. The settings and motor all generally seem to work, but ever since I installed it I’ve had issues with the set pin (which is the apparently the only thing holding it all together… --- ## [Z-axis stepper motor failed](https://forums.maslowcnc.com/t/z-axis-stepper-motor-failed/25560)
**Author:** [@mig](https://forums.maslowcnc.com/u/mig)\ **Replies:** 1\ **Last updated:** [February 27, 2026, 9:18pm UTC](https://forums.maslowcnc.com/t/z-axis-stepper-motor-failed/25560 "2026-02-27T21:18:36Z")
Mostly finished 4.1 upgrade and started testing while waiting for a broken part. Tried moving Z-axis. One stepper motor works as expected the other makes lots of noise but does not turn the screw shaft. Manually raised t… --- ## [Problem with one Z-axis motor that is not working](https://forums.maslowcnc.com/t/problem-with-one-z-axis-motor-that-is-not-working/25426)
**Author:** [@gilles\_vigneron](https://forums.maslowcnc.com/u/gilles_vigneron)\ **Replies:** 33\ **Last updated:** [February 24, 2026, 7:08pm UTC](https://forums.maslowcnc.com/t/problem-with-one-z-axis-motor-that-is-not-working/25426 "2026-02-24T19:08:09Z")
Hello, since the 1.17 update, I’ve had a problem with one of the two Z-axis motors on my Maslow. I updated via USB cable. I tested both motors by swapping the connections. The motor on the side that wasn’t working work… --- ## [3 Legged Maslow-mounting Stool](https://forums.maslowcnc.com/t/3-legged-maslow-mounting-stool/25448)
**Author:** [@waggy.online](https://forums.maslowcnc.com/u/waggy.online)\ **Replies:** 6\ **Last updated:** [January 26, 2026, 6:03pm UTC](https://forums.maslowcnc.com/t/3-legged-maslow-mounting-stool/25448 "2026-01-26T18:03:34Z")
Best Customer Service Experience Ever I had the best customer service experience with my Maslow 4.1 kit. I bought the 4 kit last year and then never took the time to put it together. When I finally found time to assemble… --- ## [Original Chain Maslow - small Z-motor](https://forums.maslowcnc.com/t/original-chain-maslow-small-z-motor/25132)
**Author:** [@HeartlandTechie](https://forums.maslowcnc.com/u/HeartlandTechie)\ **Replies:** 9\ **Last updated:** [December 12, 2025, 12:52am UTC](https://forums.maslowcnc.com/t/original-chain-maslow-small-z-motor/25132 "2025-12-12T00:52:54Z")
So I am trying to figure out why my z-axis keeps moving the wrong amount - it seems that when I put in 1 mm (I have a 8mm lead screw - from the Another Z-Axis 3D print instructions) and the unit moves 5 mm. I run the mo… --- ## [Only one z axis motor port is working (new build)](https://forums.maslowcnc.com/t/only-one-z-axis-motor-port-is-working-new-build/25103)
**Author:** [@niccokunzmann](https://forums.maslowcnc.com/u/niccokunzmann)\ **Replies:** 3\ **Last updated:** [October 27, 2025, 3:32pm UTC](https://forums.maslowcnc.com/t/only-one-z-axis-motor-port-is-working-new-build/25103 "2025-10-27T15:32:51Z")
I only have one z-axis motor port working on my board. When searching the forum, it became clear that this can happen with some boards. I just assembled the router (4.1) and tried to go through the calibration process. T… --- ## [Back after a long time... 2 questions](https://forums.maslowcnc.com/t/back-after-a-long-time-2-questions/25090)
**Author:** [@Gabe\_Merrill](https://forums.maslowcnc.com/u/Gabe_Merrill)\ **Replies:** 3\ **Last updated:** [October 23, 2025, 10:40pm UTC](https://forums.maslowcnc.com/t/back-after-a-long-time-2-questions/25090 "2025-10-23T22:40:58Z")
Hey community - have found myself with some time and I got maslow 4.1 upgrade installed. Been working through what seems like typical calibration growing pains. Doing many calibrations and my skew has gotten better. N… --- ## [Z Axis - Only one stepper working - New Build](https://forums.maslowcnc.com/t/z-axis-only-one-stepper-working-new-build/25062)
**Author:** [@AlexB](https://forums.maslowcnc.com/u/AlexB)\ **Replies:** 5\ **Last updated:** [October 15, 2025, 11:58pm UTC](https://forums.maslowcnc.com/t/z-axis-only-one-stepper-working-new-build/25062 "2025-10-15T23:58:30Z")
I just received my unit and built it, relatively easy process so far. I’ve updated the firmware etc, also all fine. Got the the part where I should jog the Z axis, nothing, just a gentle whir but nothing actually moved. … --- ## [Z Axis not working - new build](https://forums.maslowcnc.com/t/z-axis-not-working-new-build/25027)
**Author:** [@mongoosetoo](https://forums.maslowcnc.com/u/mongoosetoo)\ **Replies:** 2\ **Last updated:** [October 14, 2025, 9:22pm UTC](https://forums.maslowcnc.com/t/z-axis-not-working-new-build/25027 "2025-10-14T21:22:32Z")
Received my Maslow 4.1 last week, spent the weekend assembling it. Afterward, I was able to retract the belts just fine, but Z axis is not responding. I’ve read other posts and double checked everything, I’ve updated f… --- ## [Error after "Probe offset applied"](https://forums.maslowcnc.com/t/error-after-probe-offset-applied/25012)
**Author:** [@jjdunes](https://forums.maslowcnc.com/u/jjdunes)\ **Replies:** 3\ **Last updated:** [October 9, 2025, 6:28pm UTC](https://forums.maslowcnc.com/t/error-after-probe-offset-applied/25012 "2025-10-09T18:28:04Z")
Can anyone explain the error at the end of this FluidNC command log? I expect its the “ZNan”, but what can cause that? My probe settings are 50, 60, 10 and 0.7 for max travel, feed rate, retract distance, and plate thic… --- ## [The Z-axis does not move](https://forums.maslowcnc.com/t/the-z-axis-does-not-move/24798)
**Author:** [@Hugues\_Simon](https://forums.maslowcnc.com/u/Hugues_Simon)\ **Replies:** 6\ **Last updated:** [September 28, 2025, 11:08am UTC](https://forums.maslowcnc.com/t/the-z-axis-does-not-move/24798 "2025-09-28T11:08:17Z")
Hello, I just received my Maslow 4.1. The assembly went well, but before reaching the calibration step, I can’t get the machine to move on the Z-axis. When I command a movement, the fan turns on but there is no motion. I… --- ## [How do we set the Z offsets to get better calibration?](https://forums.maslowcnc.com/t/how-do-we-set-the-z-offsets-to-get-better-calibration/24942)
**Author:** [@Andrew\_Matthews](https://forums.maslowcnc.com/u/Andrew_Matthews)\ **Replies:** 2\ **Last updated:** [September 23, 2025, 3:43pm UTC](https://forums.maslowcnc.com/t/how-do-we-set-the-z-offsets-to-get-better-calibration/24942 "2025-09-23T15:43:29Z")
@bar I’m struggling to understand the Z axis values in the maslow.yaml file are calculated / derived and want to confirm I have the right idea in my head now. Previously the yaml file included a comment with the defaul… --- ## [Do not buy this machine, but if you are buy mine! chicago,il](https://forums.maslowcnc.com/t/do-not-buy-this-machine-but-if-you-are-buy-mine-chicago-il/24724)
**Author:** [@Juan\_Salgado](https://forums.maslowcnc.com/u/Juan_Salgado)\ **Replies:** 0\ **Last updated:** [August 14, 2025, 9:25pm UTC](https://forums.maslowcnc.com/t/do-not-buy-this-machine-but-if-you-are-buy-mine-chicago-il/24724 "2025-08-14T21:25:17Z")
To whom might read this, absolutely do not purchase this machine, but if you are please buy mine. It is practically brand new. It is so new it has never made it passed the calibration section, which is step 1. I am locat… --- ## [Z- axis - 2 bad boards? 2 bad motors? Or something funky?](https://forums.maslowcnc.com/t/z-axis-2-bad-boards-2-bad-motors-or-something-funky/24325)
**Author:** [@RandomDave](https://forums.maslowcnc.com/u/RandomDave)\ **Replies:** 24\ **Last updated:** [August 4, 2025, 5:14pm UTC](https://forums.maslowcnc.com/t/z-axis-2-bad-boards-2-bad-motors-or-something-funky/24325 "2025-08-04T17:14:49Z")
So this is all a bit funky, but possibly i’m just unlucky and got 2 bad boards (one from the latest KS, one purchased as a spare). Drop box link: What those videos show: One Z-motor (the port closest the usb) interm… --- ## [Request for types of Data On Previous Engagements](https://forums.maslowcnc.com/t/request-for-types-of-data-on-previous-engagements/24629)
**Author:** [@MontanaEthicalHacker](https://forums.maslowcnc.com/u/MontanaEthicalHacker)\ **Replies:** 0\ **Last updated:** [July 29, 2025, 9:20pm UTC](https://forums.maslowcnc.com/t/request-for-types-of-data-on-previous-engagements/24629 "2025-07-29T21:20:52Z")
Does anyone have a little scribble-pad that they write on to keep track of settings and outcomes? What do you use? More importantly(and perhaps a harder question): What types of information do you log? I have a penci… --- ## [Single Z-axis motor not working, motor is OK, controller?](https://forums.maslowcnc.com/t/single-z-axis-motor-not-working-motor-is-ok-controller/23919)
**Author:** [@Fishbowlcnc](https://forums.maslowcnc.com/u/Fishbowlcnc)\ **Replies:** 12\ **Last updated:** [July 20, 2025, 12:08am UTC](https://forums.maslowcnc.com/t/single-z-axis-motor-not-working-motor-is-ok-controller/23919 "2025-07-20T00:08:29Z")
Hello all! I receive my Maslow 4 and have completed all the assembly but ran into an issue during calibration. I’m having trouble with the Z-Axis. The motor nearest the power supply doesn’t operate. The cables are JUST … --- ## [Fusion 360 tutor](https://forums.maslowcnc.com/t/fusion-360-tutor/24494)
**Author:** [@Byron\_Abbey](https://forums.maslowcnc.com/u/Byron_Abbey)\ **Replies:** 2\ **Last updated:** [July 5, 2025, 10:27pm UTC](https://forums.maslowcnc.com/t/fusion-360-tutor/24494 "2025-07-05T22:27:13Z")
decided to learn fusion 360 I have a enough skills with blender to put togeather models looking for help with the manufacture part of fusion 360 bonus if you have experiance with maslow can anyone help? Cheers --- ## [Z diving problem?](https://forums.maslowcnc.com/t/z-diving-problem/24351)
**Author:** [@gilles\_vigneron](https://forums.maslowcnc.com/u/gilles_vigneron)\ **Replies:** 8\ **Last updated:** [June 23, 2025, 10:44am UTC](https://forums.maslowcnc.com/t/z-diving-problem/24351 "2025-06-23T10:44:10Z")
Hello, I was able to make my first cut this afternoon, I was pretty stressed! There was a problem at the beginning, and I can’t find the solution. The M4.1’s first “action” was to dive in completely, then get up, then s… --- ## [Maslow 4 -machine build -z axis](https://forums.maslowcnc.com/t/maslow-4-machine-build-z-axis/24366)
**Author:** [@steve70](https://forums.maslowcnc.com/u/steve70)\ **Replies:** 2\ **Last updated:** [June 14, 2025, 9:00pm UTC](https://forums.maslowcnc.com/t/maslow-4-machine-build-z-axis/24366 "2025-06-14T21:00:04Z")
When I lower the machine onto the sled, sliding it over the smooth rods, it stops at the tops of the z-axis stepper screws. I assumed this was “normal” and completed the build. Later after connecting to the maslow 4 vi… --- ## [One Z stepper motor is not moving](https://forums.maslowcnc.com/t/one-z-stepper-motor-is-not-moving/24073)
**Author:** [@snowstudentDev](https://forums.maslowcnc.com/u/snowstudentDev)\ **Replies:** 10\ **Last updated:** [June 10, 2025, 10:21pm UTC](https://forums.maslowcnc.com/t/one-z-stepper-motor-is-not-moving/24073 "2025-06-10T22:21:39Z")
The stepper motor on one side will not raise at all. It can only move down. The other side works fine, but this continues not to work. I tried switching the ports as suggested in some other posts, but I had no luck. If a… --- ## [Z-axis: one motor gets stuck? / does not work?](https://forums.maslowcnc.com/t/z-axis-one-motor-gets-stuck-does-not-work/24194)
**Author:** [@Jimmy](https://forums.maslowcnc.com/u/Jimmy)\ **Replies:** 2\ **Last updated:** [May 25, 2025, 9:54pm UTC](https://forums.maslowcnc.com/t/z-axis-one-motor-gets-stuck-does-not-work/24194 "2025-05-25T21:54:59Z")
Hi, I just finished building my Maslow 4.1. However, when trying to adjust the z-axis height, one motor doesn’t seem to work as expected. Initially, I was able to move the router down all the way, but I can’t seem to … --- ## [Z-Axis only goes up](https://forums.maslowcnc.com/t/z-axis-only-goes-up/23947)
**Author:** [@Liljack](https://forums.maslowcnc.com/u/Liljack)\ **Replies:** 8\ **Last updated:** [May 15, 2025, 7:19pm UTC](https://forums.maslowcnc.com/t/z-axis-only-goes-up/23947 "2025-05-15T19:19:03Z")
When using the Maslow web controls, the Z stepper buttons both move the z-axis up. The stepper motors move smooth and can be hand rotated in both directions but when you control it from the we UI, both buttons move the z… --- ## [Router Independent Sled with spools on same z-plane](https://forums.maslowcnc.com/t/router-independent-sled-with-spools-on-same-z-plane/24035)
**Author:** [@Seaghost](https://forums.maslowcnc.com/u/Seaghost)\ **Replies:** 10\ **Last updated:** [May 15, 2025, 8:17am UTC](https://forums.maslowcnc.com/t/router-independent-sled-with-spools-on-same-z-plane/24035 "2025-05-15T08:17:43Z")
Pictures show mock up of proposal. Router is only component on z axis, it is mounted using its fixed base, and can be easily removed, the fixed base would be bolted to the bottom (clamp) plate, no top plate would be req… [Next page](https://forums.maslowcnc.com/tag/z-axis/42.md?match_all_tags=true&page=1&tags%5B%5D=z-axis)