Here are the files in the general order I ran them, inner then outer, left to right. I did the chair perimeter last because I thought it would look cool 
Crossbeam Holes Left.nc (725.8 KB)
Crossbeam Left.nc (178.5 KB)
Notches.nc (22.9 KB)
Chair Holes Left.nc (1.8 MB)
Chair Holes Right.nc (1.9 MB)
Crossbeam Holes Right.nc (1.4 MB)
Crossbeam Right.nc (159.7 KB)
Chair Perimeter.nc (338.8 KB)
These files are set to cut 20 mm in 5 mm passes. The holes have 7 mm passes.
