Kelly – Sorry to hear this. I have taken a picture of how my wires are currently connected.
I use the Smoke Herder Shield currently and before that I used the old style of Maslow shield and all the wires went together the exact same except for Blue on the motor is the orange on the stock Maslow loom. You can also read here about my initial frustrations with my first motor, I tried to solder directly to the back of the motor and I think either I broke something or it was bad from the manufacturer because it was not working properly, I ended up getting a second motor and it worked perfectly and has been for months now. As for the TLE board I have 0 experience with that and unfortunately can only tell you how mine is currently working.