Cant move Z Motors getting HOT

[Russ]

Maybe corrupt maslow.yaml file? Similar issue here:

Z-axis won't move after reassembling my machine and updating to 0.70

I’m not sure what might be wrong. I had my machine apart to install a replacement belt and add belt guards to all four arms. I reassembled today and updated the firmware to 0.70. I was able to retract the belts but I can’t move the z-axis. (I do have Alarm turned off.). When I try to move the z-axis, either up or down, the fan will run briefly but the steppers don’t move. I tried moving the lead screws manually while the power is on and they would not move (and the steppers are hot). When …