First off, Hi all!
I just got my Maslow up and running. calibration went allright and stock parts are working.
Also I would like to add that I have been running cnc equipment for years and doing basic editing such as find and delete.
So now the problem, I did my normal find and delete on the z program but now it crashes/locks up the router. I am at a loss why it is doing this as the code looks right. I am not sure if I can pots the code here for somone to look at.
Thank you in advance
Randy
Welcome to the Forum!
So you deleted z-moves from the g-code and now it does not run?
You can’t upload right away as a new user, but a few comments will get you past this.
I deleted all the other parts exept the base. The first cuts are still the same.
Hard to tell without the g-code, but you should be able to upload it soon.
Could think of that the ‘M30 (program-end)’ is missing or so.
The program hangs right at the start before the router starts moving.
Share your edited code here and we can look at it, but it’s pretty impossible to troubleshoot without seeing the code.
Have you tried putting it into something like ncviewer.com ?
Haha. That is the program I used to edit the code. Will post the code right away.
%
(MeticulousSled_0250-1FL)
(T1 D=6.35 CR=0 - ZMIN=-18.5 - flat end mill)
G90 G94
G17
G21
G28 G91 Z0
G90
(2D Pocket2)
M9
T1 M6
S12000 M3
G54
M9
G0 X1.175 Y76.2
Z5
G1 Z2.5 F500
Z-8
G2 X2.825 I0.825
X-2.825 I-2.825
X6.825 I4.825
X-6.825 I-6.825
X10.825 I8.825
X-10.825 I-10.825
X10.825 I10.825
X10.19 Y75.565 I-0.635
G0 Z5
X80.997 Y80.822
G1 Z2.5 F500
Z-8
G2 X84.647 I1.825
X76.997 I-3.825
X88.647 I5.825
X72.997 I-7.825
X88.647 I7.825
X88.012 Y80.187 I-0.635
G0 Z5
X80.997 Y-80.822
G1 Z2.5 F500
Z-8
G2 X84.647 I1.825
X76.997 I-3.825
X88.647 I5.825
X72.997 I-7.825
X88.647 I7.825
X88.012 Y-81.457 I-0.635
G0 Z5
X-80.647 Y-80.822
G1 Z2.5 F500
Z-8
G2 X-76.997 I1.825
X-84.647 I-3.825
X-72.997 I5.825
X-88.647 I-7.825
X-72.997 I7.825
X-73.632 Y-81.457 I-0.635
G0 Z5
X-80.647 Y80.822
G1 Z2.5 F500
Z-8
G2 X-76.997 I1.825
X-84.647 I-3.825
X-72.997 I5.825
X-88.647 I-7.825
X-72.997 I7.825
X-73.632 Y80.187 I-0.635
G0 Z5
X1.175 Y228.6
G1 Z2.5 F500
Z-8
G2 X2.825 I0.825
X-2.825 I-2.825
X6.825 I4.825
X-6.825 I-6.825
X10.825 I8.825
X-10.825 I-10.825
X10.825 I10.825
X10.19 Y227.965 I-0.635
G0 Z5
(2D Pocket4)
M9
Z7
X-129 Y-125.19
G1 Z-6 F500
X-127.009
G2 X-126.69 Y-125.509 J-0.319
G1 Y-129.491
G2 X-127.009 Y-129.81 I-0.319
G1 X-152.991
G2 X-153.31 Y-129.491 J0.319
G1 Y-125.509
G2 X-152.991 Y-125.19 I0.319
G1 X-129
G3 X-125.886 Y-123.403 J3.606
G2 X-123.173 Y-121.051 I4.811 J-2.81
G3 X-122 Y-120.225 I-1.195 J2.941
G2 X-121.717 Y-120.217 I0.145 J-0.13
X-121.725 Y-120.5 I-0.138 J-0.138
G3 X-122.785 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X-121.725 Y-134.5 I3.175
G2 X-121.717 Y-134.783 I-0.13 J-0.145
X-122 Y-134.775 I-0.138 J0.138
G3 X-124.368 Y-133.715 I-2.368 J-2.115
G1 X-155.632
G3 X-158 Y-134.775 J-3.175
G2 X-158.283 Y-134.783 I-0.145 J0.13
X-158.275 Y-134.5 I0.138 J0.138
G3 X-157.215 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X-158.275 Y-120.5 I-3.175
G2 X-158.283 Y-120.217 I0.13 J0.145
X-158 Y-120.225 I0.138 J-0.138
G3 X-155.632 Y-121.285 I2.368 J2.115
G1 X-124.368
G3 X-123.173 Y-121.051 J3.175
G2 X-123.093 Y-121.153 I0.025 J-0.062
G1 X-123.251 Y-121.367
X-128.252 Y-125.54
G2 X-128.335 Y-125.591 I-0.208 J0.249
G1 X-128.875 Y-125.815
G2 X-129.125 Y-125.215 I-0.125 J0.3
X-129 Y-125.19 I0.125 J-0.3
G1 Z-12
X-127.009
G2 X-126.69 Y-125.509 J-0.319
G1 Y-129.491
G2 X-127.009 Y-129.81 I-0.319
G1 X-152.991
G2 X-153.31 Y-129.491 J0.319
G1 Y-125.509
G2 X-152.991 Y-125.19 I0.319
G1 X-129
G3 X-125.886 Y-123.403 J3.606
G2 X-123.173 Y-121.051 I4.811 J-2.81
G3 X-122 Y-120.225 I-1.195 J2.941
G2 X-121.717 Y-120.217 I0.145 J-0.13
X-121.725 Y-120.5 I-0.138 J-0.138
G3 X-122.785 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X-121.725 Y-134.5 I3.175
G2 X-121.717 Y-134.783 I-0.13 J-0.145
X-122 Y-134.775 I-0.138 J0.138
G3 X-124.368 Y-133.715 I-2.368 J-2.115
G1 X-155.632
G3 X-158 Y-134.775 J-3.175
G2 X-158.283 Y-134.783 I-0.145 J0.13
X-158.275 Y-134.5 I0.138 J0.138
G3 X-157.215 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X-158.275 Y-120.5 I-3.175
G2 X-158.283 Y-120.217 I0.13 J0.145
X-158 Y-120.225 I0.138 J-0.138
G3 X-155.632 Y-121.285 I2.368 J2.115
G1 X-124.368
G3 X-123.173 Y-121.051 J3.175
G2 X-123.093 Y-121.153 I0.025 J-0.062
G1 X-123.251 Y-121.367
X-128.252 Y-125.54
G2 X-128.335 Y-125.591 I-0.208 J0.249
G1 X-128.875 Y-125.815
G2 X-129.125 Y-125.215 I-0.125 J0.3
X-129 Y-125.19 I0.125 J-0.3
G1 Z-15.25
X-127.009
G2 X-126.69 Y-125.509 J-0.319
G1 Y-129.491
G2 X-127.009 Y-129.81 I-0.319
G1 X-152.991
G2 X-153.31 Y-129.491 J0.319
G1 Y-125.509
G2 X-152.991 Y-125.19 I0.319
G1 X-129
G3 X-125.886 Y-123.403 J3.606
G2 X-123.173 Y-121.051 I4.811 J-2.81
G3 X-122 Y-120.225 I-1.195 J2.941
G2 X-121.717 Y-120.217 I0.145 J-0.13
X-121.725 Y-120.5 I-0.138 J-0.138
G3 X-122.785 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X-121.725 Y-134.5 I3.175
G2 X-121.717 Y-134.783 I-0.13 J-0.145
X-122 Y-134.775 I-0.138 J0.138
G3 X-124.368 Y-133.715 I-2.368 J-2.115
G1 X-155.632
G3 X-158 Y-134.775 J-3.175
G2 X-158.283 Y-134.783 I-0.145 J0.13
X-158.275 Y-134.5 I0.138 J0.138
G3 X-157.215 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X-158.275 Y-120.5 I-3.175
G2 X-158.283 Y-120.217 I0.13 J0.145
X-158 Y-120.225 I0.138 J-0.138
G3 X-155.632 Y-121.285 I2.368 J2.115
G1 X-124.368
G3 X-123.173 Y-121.051 J3.175
G2 X-123.093 Y-121.153 I0.025 J-0.062
G1 X-123.251 Y-121.367
X-128.252 Y-125.54
G2 X-128.335 Y-125.591 I-0.208 J0.249
G1 X-128.875 Y-125.815
G2 X-129.125 Y-125.215 I-0.125 J0.3
X-129 Y-125.19 I0.125 J-0.3
G1 Z-18.5
X-127.009
G2 X-126.69 Y-125.509 J-0.319
G1 Y-129.491
G2 X-127.009 Y-129.81 I-0.319
G1 X-152.991
G2 X-153.31 Y-129.491 J0.319
G1 Y-125.509
G2 X-152.991 Y-125.19 I0.319
G1 X-129
G3 X-125.886 Y-123.403 J3.606
G2 X-123.173 Y-121.051 I4.811 J-2.81
G3 X-122 Y-120.225 I-1.195 J2.941
G2 X-121.717 Y-120.217 I0.145 J-0.13
X-121.725 Y-120.5 I-0.138 J-0.138
G3 X-122.785 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X-121.725 Y-134.5 I3.175
G2 X-121.717 Y-134.783 I-0.13 J-0.145
X-122 Y-134.775 I-0.138 J0.138
G3 X-124.368 Y-133.715 I-2.368 J-2.115
G1 X-155.632
G3 X-158 Y-134.775 J-3.175
G2 X-158.283 Y-134.783 I-0.145 J0.13
X-158.275 Y-134.5 I0.138 J0.138
G3 X-157.215 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X-158.275 Y-120.5 I-3.175
G2 X-158.283 Y-120.217 I0.13 J0.145
X-158 Y-120.225 I0.138 J-0.138
G3 X-155.632 Y-121.285 I2.368 J2.115
G1 X-124.368
G3 X-123.173 Y-121.051 J3.175
G0 Z7
X-77.69 Y-202.5
G1 Z-6 F500
Y-204.491
G2 X-78.009 Y-204.81 I-0.319
G1 X-81.995
G2 X-82.31 Y-204.495 J0.315
G1 Y-168.509
G2 X-81.991 Y-168.19 I0.319
G1 X-78.009
G2 X-77.69 Y-168.509 J-0.319
G1 Y-202.5
G3 X-75.903 Y-205.614 I3.606
G2 X-73.551 Y-208.327 I-2.81 J-4.811
G3 X-72.725 Y-209.5 I2.941 J1.195
G2 X-72.717 Y-209.783 I-0.13 J-0.145
X-73 Y-209.775 I-0.138 J0.138
G3 X-75.368 Y-208.715 I-2.368 J-2.115
G1 X-84.632
G3 X-87 Y-209.775 J-3.175
G2 X-87.283 Y-209.783 I-0.145 J0.13
X-87.275 Y-209.5 I0.138 J0.138
G3 X-86.215 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X-87.275 Y-163.5 I-3.175
G2 X-87.283 Y-163.217 I0.13 J0.145
X-87 Y-163.225 I0.138 J-0.138
G3 X-84.632 Y-164.285 I2.368 J2.115
G1 X-75.368
G3 X-73 Y-163.225 J3.175
G2 X-72.717 Y-163.217 I0.145 J-0.13
X-72.725 Y-163.5 I-0.138 J-0.138
G3 X-73.785 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X-73.551 Y-208.327 I3.175
G2 X-73.653 Y-208.407 I-0.062 J-0.025
G1 X-73.867 Y-208.249
X-78.04 Y-203.248
G2 X-78.091 Y-203.165 I0.249 J0.208
G1 X-78.315 Y-202.625
G2 X-77.715 Y-202.375 I0.3 J0.125
X-77.69 Y-202.5 I-0.3 J-0.125
G1 Z-12
Y-204.491
G2 X-78.009 Y-204.81 I-0.319
G1 X-81.995
G2 X-82.31 Y-204.495 J0.315
G1 Y-168.509
G2 X-81.991 Y-168.19 I0.319
G1 X-78.009
G2 X-77.69 Y-168.509 J-0.319
G1 Y-202.5
G3 X-75.903 Y-205.614 I3.606
G2 X-73.551 Y-208.327 I-2.81 J-4.811
G3 X-72.725 Y-209.5 I2.941 J1.195
G2 X-72.717 Y-209.783 I-0.13 J-0.145
X-73 Y-209.775 I-0.138 J0.138
G3 X-75.368 Y-208.715 I-2.368 J-2.115
G1 X-84.632
G3 X-87 Y-209.775 J-3.175
G2 X-87.283 Y-209.783 I-0.145 J0.13
X-87.275 Y-209.5 I0.138 J0.138
G3 X-86.215 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X-87.275 Y-163.5 I-3.175
G2 X-87.283 Y-163.217 I0.13 J0.145
X-87 Y-163.225 I0.138 J-0.138
G3 X-84.632 Y-164.285 I2.368 J2.115
G1 X-75.368
G3 X-73 Y-163.225 J3.175
G2 X-72.717 Y-163.217 I0.145 J-0.13
X-72.725 Y-163.5 I-0.138 J-0.138
G3 X-73.785 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X-73.551 Y-208.327 I3.175
G2 X-73.653 Y-208.407 I-0.062 J-0.025
G1 X-73.867 Y-208.249
X-78.04 Y-203.248
G2 X-78.091 Y-203.165 I0.249 J0.208
G1 X-78.315 Y-202.625
G2 X-77.715 Y-202.375 I0.3 J0.125
X-77.69 Y-202.5 I-0.3 J-0.125
G1 Z-15.25
Y-204.491
G2 X-78.009 Y-204.81 I-0.319
G1 X-81.995
G2 X-82.31 Y-204.495 J0.315
G1 Y-168.509
G2 X-81.991 Y-168.19 I0.319
G1 X-78.009
G2 X-77.69 Y-168.509 J-0.319
G1 Y-202.5
G3 X-75.903 Y-205.614 I3.606
G2 X-73.551 Y-208.327 I-2.81 J-4.811
G3 X-72.725 Y-209.5 I2.941 J1.195
G2 X-72.717 Y-209.783 I-0.13 J-0.145
X-73 Y-209.775 I-0.138 J0.138
G3 X-75.368 Y-208.715 I-2.368 J-2.115
G1 X-84.632
G3 X-87 Y-209.775 J-3.175
G2 X-87.283 Y-209.783 I-0.145 J0.13
X-87.275 Y-209.5 I0.138 J0.138
G3 X-86.215 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X-87.275 Y-163.5 I-3.175
G2 X-87.283 Y-163.217 I0.13 J0.145
X-87 Y-163.225 I0.138 J-0.138
G3 X-84.632 Y-164.285 I2.368 J2.115
G1 X-75.368
G3 X-73 Y-163.225 J3.175
G2 X-72.717 Y-163.217 I0.145 J-0.13
X-72.725 Y-163.5 I-0.138 J-0.138
G3 X-73.785 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X-73.551 Y-208.327 I3.175
G2 X-73.653 Y-208.407 I-0.062 J-0.025
G1 X-73.867 Y-208.249
X-78.04 Y-203.248
G2 X-78.091 Y-203.165 I0.249 J0.208
G1 X-78.315 Y-202.625
G2 X-77.715 Y-202.375 I0.3 J0.125
X-77.69 Y-202.5 I-0.3 J-0.125
G1 Z-18.5
Y-204.491
G2 X-78.009 Y-204.81 I-0.319
G1 X-81.995
G2 X-82.31 Y-204.495 J0.315
G1 Y-168.509
G2 X-81.991 Y-168.19 I0.319
G1 X-78.009
G2 X-77.69 Y-168.509 J-0.319
G1 Y-202.5
G3 X-75.903 Y-205.614 I3.606
G2 X-73.551 Y-208.327 I-2.81 J-4.811
G3 X-72.725 Y-209.5 I2.941 J1.195
G2 X-72.717 Y-209.783 I-0.13 J-0.145
X-73 Y-209.775 I-0.138 J0.138
G3 X-75.368 Y-208.715 I-2.368 J-2.115
G1 X-84.632
G3 X-87 Y-209.775 J-3.175
G2 X-87.283 Y-209.783 I-0.145 J0.13
X-87.275 Y-209.5 I0.138 J0.138
G3 X-86.215 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X-87.275 Y-163.5 I-3.175
G2 X-87.283 Y-163.217 I0.13 J0.145
X-87 Y-163.225 I0.138 J-0.138
G3 X-84.632 Y-164.285 I2.368 J2.115
G1 X-75.368
G3 X-73 Y-163.225 J3.175
G2 X-72.717 Y-163.217 I0.145 J-0.13
X-72.725 Y-163.5 I-0.138 J-0.138
G3 X-73.785 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X-73.551 Y-208.327 I3.175
G0 Z7
X82.31 Y-202.5
G1 Z-6 F500
Y-204.491
G2 X81.991 Y-204.81 I-0.319
G1 X78.009
G2 X77.69 Y-204.491 J0.319
G1 Y-168.509
G2 X78.009 Y-168.19 I0.319
G1 X81.991
G2 X82.31 Y-168.509 J-0.319
G1 Y-202.5
G3 X84.097 Y-205.614 I3.606
G2 X86.449 Y-208.327 I-2.81 J-4.811
G3 X87.275 Y-209.5 I2.941 J1.195
G2 X87.283 Y-209.783 I-0.13 J-0.145
X87 Y-209.775 I-0.138 J0.138
G3 X84.632 Y-208.715 I-2.368 J-2.115
G1 X75.368
G3 X73 Y-209.775 J-3.175
G2 X72.717 Y-209.783 I-0.145 J0.13
X72.725 Y-209.5 I0.138 J0.138
G3 X73.785 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X72.725 Y-163.5 I-3.175
G2 X72.717 Y-163.217 I0.13 J0.145
X73 Y-163.225 I0.138 J-0.138
G3 X75.368 Y-164.285 I2.368 J2.115
G1 X84.632
G3 X87 Y-163.225 J3.175
G2 X87.283 Y-163.217 I0.145 J-0.13
X87.275 Y-163.5 I-0.138 J-0.138
G3 X86.215 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X86.449 Y-208.327 I3.175
G2 X86.089 Y-208.5 I-0.185 J-0.075
G1 X82.685 Y-202.403
G3 X82.31 Y-202.5 I-0.175 J-0.097
G1 Z-12
Y-204.491
G2 X81.991 Y-204.81 I-0.319
G1 X78.009
G2 X77.69 Y-204.491 J0.319
G1 Y-168.509
G2 X78.009 Y-168.19 I0.319
G1 X81.991
G2 X82.31 Y-168.509 J-0.319
G1 Y-202.5
G3 X84.097 Y-205.614 I3.606
G2 X86.449 Y-208.327 I-2.81 J-4.811
G3 X87.275 Y-209.5 I2.941 J1.195
G2 X87.283 Y-209.783 I-0.13 J-0.145
X87 Y-209.775 I-0.138 J0.138
G3 X84.632 Y-208.715 I-2.368 J-2.115
G1 X75.368
G3 X73 Y-209.775 J-3.175
G2 X72.717 Y-209.783 I-0.145 J0.13
X72.725 Y-209.5 I0.138 J0.138
G3 X73.785 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X72.725 Y-163.5 I-3.175
G2 X72.717 Y-163.217 I0.13 J0.145
X73 Y-163.225 I0.138 J-0.138
G3 X75.368 Y-164.285 I2.368 J2.115
G1 X84.632
G3 X87 Y-163.225 J3.175
G2 X87.283 Y-163.217 I0.145 J-0.13
X87.275 Y-163.5 I-0.138 J-0.138
G3 X86.215 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X86.449 Y-208.327 I3.175
G2 X86.089 Y-208.5 I-0.185 J-0.075
G1 X82.685 Y-202.403
G3 X82.31 Y-202.5 I-0.175 J-0.097
G1 Z-15.25
Y-204.491
G2 X81.991 Y-204.81 I-0.319
G1 X78.009
G2 X77.69 Y-204.491 J0.319
G1 Y-168.509
G2 X78.009 Y-168.19 I0.319
G1 X81.991
G2 X82.31 Y-168.509 J-0.319
G1 Y-202.5
G3 X84.097 Y-205.614 I3.606
G2 X86.449 Y-208.327 I-2.81 J-4.811
G3 X87.275 Y-209.5 I2.941 J1.195
G2 X87.283 Y-209.783 I-0.13 J-0.145
X87 Y-209.775 I-0.138 J0.138
G3 X84.632 Y-208.715 I-2.368 J-2.115
G1 X75.368
G3 X73 Y-209.775 J-3.175
G2 X72.717 Y-209.783 I-0.145 J0.13
X72.725 Y-209.5 I0.138 J0.138
G3 X73.785 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X72.725 Y-163.5 I-3.175
G2 X72.717 Y-163.217 I0.13 J0.145
X73 Y-163.225 I0.138 J-0.138
G3 X75.368 Y-164.285 I2.368 J2.115
G1 X84.632
G3 X87 Y-163.225 J3.175
G2 X87.283 Y-163.217 I0.145 J-0.13
X87.275 Y-163.5 I-0.138 J-0.138
G3 X86.215 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X86.449 Y-208.327 I3.175
G2 X86.089 Y-208.5 I-0.185 J-0.075
G1 X82.685 Y-202.403
G3 X82.31 Y-202.5 I-0.175 J-0.097
G1 Z-18.5
Y-204.491
G2 X81.991 Y-204.81 I-0.319
G1 X78.009
G2 X77.69 Y-204.491 J0.319
G1 Y-168.509
G2 X78.009 Y-168.19 I0.319
G1 X81.991
G2 X82.31 Y-168.509 J-0.319
G1 Y-202.5
G3 X84.097 Y-205.614 I3.606
G2 X86.449 Y-208.327 I-2.81 J-4.811
G3 X87.275 Y-209.5 I2.941 J1.195
G2 X87.283 Y-209.783 I-0.13 J-0.145
X87 Y-209.775 I-0.138 J0.138
G3 X84.632 Y-208.715 I-2.368 J-2.115
G1 X75.368
G3 X73 Y-209.775 J-3.175
G2 X72.717 Y-209.783 I-0.145 J0.13
X72.725 Y-209.5 I0.138 J0.138
G3 X73.785 Y-207.132 I-2.115 J2.368
G1 Y-165.868
G3 X72.725 Y-163.5 I-3.175
G2 X72.717 Y-163.217 I0.13 J0.145
X73 Y-163.225 I0.138 J-0.138
G3 X75.368 Y-164.285 I2.368 J2.115
G1 X84.632
G3 X87 Y-163.225 J3.175
G2 X87.283 Y-163.217 I0.145 J-0.13
X87.275 Y-163.5 I-0.138 J-0.138
G3 X86.215 Y-165.868 I2.115 J-2.368
G1 Y-207.132
G3 X86.449 Y-208.327 I3.175
G0 Z7
X129 Y-129.81
G1 Z-6 F500
X127.005
G2 X126.69 Y-129.495 J0.315
G1 Y-125.509
G2 X127.009 Y-125.19 I0.319
G1 X152.991
G2 X153.31 Y-125.509 J-0.319
G1 Y-129.491
G2 X152.991 Y-129.81 I-0.319
G1 X129
G3 X125.886 Y-131.597 J-3.606
G2 X123.173 Y-133.949 I-4.811 J2.81
G3 X122 Y-134.775 I1.195 J-2.941
G2 X121.717 Y-134.783 I-0.145 J0.13
X121.725 Y-134.5 I0.138 J0.138
G3 X122.785 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X121.725 Y-120.5 I-3.175
G2 X121.717 Y-120.217 I0.13 J0.145
X122 Y-120.225 I0.138 J-0.138
G3 X124.368 Y-121.285 I2.368 J2.115
G1 X155.632
G3 X158 Y-120.225 J3.175
G2 X158.283 Y-120.217 I0.145 J-0.13
X158.275 Y-120.5 I-0.138 J-0.138
G3 X157.215 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X158.275 Y-134.5 I3.175
G2 X158.283 Y-134.783 I-0.13 J-0.145
X158 Y-134.775 I-0.138 J0.138
G3 X155.632 Y-133.715 I-2.368 J-2.115
G1 X124.368
G3 X123.173 Y-133.949 J-3.175
G2 X123 Y-133.589 I-0.075 J0.185
G1 X129.097 Y-130.185
G3 X129 Y-129.81 I-0.097 J0.175
G1 Z-12
X127.005
G2 X126.69 Y-129.495 J0.315
G1 Y-125.509
G2 X127.009 Y-125.19 I0.319
G1 X152.991
G2 X153.31 Y-125.509 J-0.319
G1 Y-129.491
G2 X152.991 Y-129.81 I-0.319
G1 X129
G3 X125.886 Y-131.597 J-3.606
G2 X123.173 Y-133.949 I-4.811 J2.81
G3 X122 Y-134.775 I1.195 J-2.941
G2 X121.717 Y-134.783 I-0.145 J0.13
X121.725 Y-134.5 I0.138 J0.138
G3 X122.785 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X121.725 Y-120.5 I-3.175
G2 X121.717 Y-120.217 I0.13 J0.145
X122 Y-120.225 I0.138 J-0.138
G3 X124.368 Y-121.285 I2.368 J2.115
G1 X155.632
G3 X158 Y-120.225 J3.175
G2 X158.283 Y-120.217 I0.145 J-0.13
X158.275 Y-120.5 I-0.138 J-0.138
G3 X157.215 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X158.275 Y-134.5 I3.175
G2 X158.283 Y-134.783 I-0.13 J-0.145
X158 Y-134.775 I-0.138 J0.138
G3 X155.632 Y-133.715 I-2.368 J-2.115
G1 X124.368
G3 X123.173 Y-133.949 J-3.175
G2 X123 Y-133.589 I-0.075 J0.185
G1 X129.097 Y-130.185
G3 X129 Y-129.81 I-0.097 J0.175
G1 Z-15.25
X127.005
G2 X126.69 Y-129.495 J0.315
G1 Y-125.509
G2 X127.009 Y-125.19 I0.319
G1 X152.991
G2 X153.31 Y-125.509 J-0.319
G1 Y-129.491
G2 X152.991 Y-129.81 I-0.319
G1 X129
G3 X125.886 Y-131.597 J-3.606
G2 X123.173 Y-133.949 I-4.811 J2.81
G3 X122 Y-134.775 I1.195 J-2.941
G2 X121.717 Y-134.783 I-0.145 J0.13
X121.725 Y-134.5 I0.138 J0.138
G3 X122.785 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X121.725 Y-120.5 I-3.175
G2 X121.717 Y-120.217 I0.13 J0.145
X122 Y-120.225 I0.138 J-0.138
G3 X124.368 Y-121.285 I2.368 J2.115
G1 X155.632
G3 X158 Y-120.225 J3.175
G2 X158.283 Y-120.217 I0.145 J-0.13
X158.275 Y-120.5 I-0.138 J-0.138
G3 X157.215 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X158.275 Y-134.5 I3.175
G2 X158.283 Y-134.783 I-0.13 J-0.145
X158 Y-134.775 I-0.138 J0.138
G3 X155.632 Y-133.715 I-2.368 J-2.115
G1 X124.368
G3 X123.173 Y-133.949 J-3.175
G2 X123 Y-133.589 I-0.075 J0.185
G1 X129.097 Y-130.185
G3 X129 Y-129.81 I-0.097 J0.175
G1 Z-18.5
X127.005
G2 X126.69 Y-129.495 J0.315
G1 Y-125.509
G2 X127.009 Y-125.19 I0.319
G1 X152.991
G2 X153.31 Y-125.509 J-0.319
G1 Y-129.491
G2 X152.991 Y-129.81 I-0.319
G1 X129
G3 X125.886 Y-131.597 J-3.606
G2 X123.173 Y-133.949 I-4.811 J2.81
G3 X122 Y-134.775 I1.195 J-2.941
G2 X121.717 Y-134.783 I-0.145 J0.13
X121.725 Y-134.5 I0.138 J0.138
G3 X122.785 Y-132.132 I-2.115 J2.368
G1 Y-122.868
G3 X121.725 Y-120.5 I-3.175
G2 X121.717 Y-120.217 I0.13 J0.145
X122 Y-120.225 I0.138 J-0.138
G3 X124.368 Y-121.285 I2.368 J2.115
G1 X155.632
G3 X158 Y-120.225 J3.175
G2 X158.283 Y-120.217 I0.145 J-0.13
X158.275 Y-120.5 I-0.138 J-0.138
G3 X157.215 Y-122.868 I2.115 J-2.368
G1 Y-132.132
G3 X158.275 Y-134.5 I3.175
G2 X158.283 Y-134.783 I-0.13 J-0.145
X158 Y-134.775 I-0.138 J0.138
G3 X155.632 Y-133.715 I-2.368 J-2.115
G1 X124.368
G3 X123.173 Y-133.949 J-3.175
G0 Z7
(2D Contour4)
M9
X165.137 Y193.578
G1 Z5 F500
Z-4.625
X164.726 Y193.094
G2 X163.831 Y193.02 I-0.484 J0.411
G3 X0 Y253.175 I-163.831 J-193.02
X-35.321 Y250.7 I-0.007 J-253.176
X-253.175 Y0 I35.321 J-250.699
X253.175 I253.175
X154.502 Y200.566 I-253.175
G2 X154.386 Y201.457 I0.388 J0.503
G1 X154.774 Y201.96
G0 Z5
G0 Z5
X35.466 Y42.766
G1 Z-4.625 F500
X35.877 Y43.25
G2 X36.772 Y43.323 I0.484 J-0.411
X56.622 Y-4.796 I-36.772 J-43.323
G3 X59.034 Y-20.779 I34.693 J-2.938
G2 X57.809 Y-35.473 I-15.177 J-6.133
G3 X54.12 Y-41.906 I106.631 J-65.431
X37.37 Y-90.427 I143.222 J-76.594
G2 X17.843 Y-106.825 I-19.527 J3.427
G1 X-17.843
G2 X-37.37 Y-90.427 J19.825
G3 X-54.12 Y-41.906 I-159.972 J-28.073
X-57.809 Y-35.473 I-110.32 J-58.998
G2 X-59.034 Y-20.779 I13.952 J8.561
G3 X-56.622 Y-4.796 I-32.282 J13.045
G2 X45.036 Y34.653 I56.622 J4.796
X44.92 Y33.763 I-0.503 J-0.387
G1 X44.417 Y33.375
X35.466 Y42.766
Z-9.25
X35.877 Y43.25
G2 X36.772 Y43.323 I0.484 J-0.411
X56.622 Y-4.796 I-36.772 J-43.323
G3 X59.034 Y-20.779 I34.693 J-2.938
G2 X57.809 Y-35.473 I-15.177 J-6.133
G3 X54.12 Y-41.906 I106.631 J-65.431
X37.37 Y-90.427 I143.222 J-76.594
G2 X17.843 Y-106.825 I-19.527 J3.427
G1 X-17.843
G2 X-37.37 Y-90.427 J19.825
G3 X-54.12 Y-41.906 I-159.972 J-28.073
X-57.809 Y-35.473 I-110.32 J-58.998
G2 X-59.034 Y-20.779 I13.952 J8.561
G3 X-56.622 Y-4.796 I-32.282 J13.045
G2 X45.036 Y34.653 I56.622 J4.796
X44.92 Y33.763 I-0.503 J-0.387
G1 X44.417 Y33.375
X35.466 Y42.766
Z-13.875
X35.877 Y43.25
G2 X36.772 Y43.323 I0.484 J-0.411
X56.622 Y-4.796 I-36.772 J-43.323
G3 X59.034 Y-20.779 I34.693 J-2.938
G2 X57.809 Y-35.473 I-15.177 J-6.133
G3 X54.12 Y-41.906 I106.631 J-65.431
X37.37 Y-90.427 I143.222 J-76.594
G2 X17.843 Y-106.825 I-19.527 J3.427
G1 X-17.843
G2 X-37.37 Y-90.427 J19.825
G3 X-54.12 Y-41.906 I-159.972 J-28.073
X-57.809 Y-35.473 I-110.32 J-58.998
G2 X-59.034 Y-20.779 I13.952 J8.561
G3 X-56.622 Y-4.796 I-32.282 J13.045
G2 X45.036 Y34.653 I56.622 J4.796
X44.92 Y33.763 I-0.503 J-0.387
G1 X44.417 Y33.375
X35.466 Y42.766
Z-18.5
X35.877 Y43.25
G2 X36.772 Y43.323 I0.484 J-0.411
X44.164 Y35.758 I-36.772 J-43.323
G1 Z-15.5
G2 X52.517 Y21.703 I-44.164 J-35.758
G1 Z-18.5
G2 X56.622 Y-4.796 I-52.517 J-21.703
G3 X59.034 Y-20.779 I34.693 J-2.938
G2 X57.809 Y-35.473 I-15.177 J-6.133
G3 X54.12 Y-41.906 I106.631 J-65.431
X37.37 Y-90.427 I143.222 J-76.594
G2 X17.843 Y-106.825 I-19.527 J3.427
G1 X9.297
Z-15.5
X-7.053
Z-18.5
X-17.843
G2 X-37.37 Y-90.427 J19.825
G3 X-54.12 Y-41.906 I-159.972 J-28.073
X-57.809 Y-35.473 I-110.32 J-58.998
G2 X-59.034 Y-20.779 I13.952 J8.561
G3 X-56.622 Y-4.796 I-32.282 J13.045
G2 X-53.358 Y19.546 I56.622 J4.796
G1 Z-15.5
G2 X-45.584 Y33.929 I53.358 J-19.546
G1 Z-18.5
G2 X44.164 Y35.758 I45.584 J-33.929
G1 Z-15.5
G2 X45.036 Y34.653 I-44.164 J-35.758
X44.92 Y33.763 I-0.503 J-0.387
G1 X44.417 Y33.375
G0 Z5
X165.137 Y193.578
G1 Z0.375 F500
Z-9.25
X164.726 Y193.094
G2 X163.831 Y193.02 I-0.484 J0.411
G3 X0 Y253.175 I-163.831 J-193.02
X-35.321 Y250.7 I-0.007 J-253.176
X-253.175 Y0 I35.321 J-250.699
X253.175 I253.175
X154.502 Y200.566 I-253.175
G2 X154.386 Y201.457 I0.388 J0.503
G1 X154.774 Y201.96
X165.137 Y193.578
Z-13.875
X164.726 Y193.094
G2 X163.831 Y193.02 I-0.484 J0.411
G3 X0 Y253.175 I-163.831 J-193.02
X-35.321 Y250.7 I-0.007 J-253.176
X-253.175 Y0 I35.321 J-250.699
X253.175 I253.175
X154.502 Y200.566 I-253.175
G2 X154.386 Y201.457 I0.388 J0.503
G1 X154.774 Y201.96
G0 Z5
X165.137 Y193.578
G1 Z-8.875 F500
Z-18.5
X164.726 Y193.094
G2 X163.831 Y193.02 I-0.484 J0.411
G3 X4.344 Y253.138 I-163.831 J-193.02
G1 Z-15.5
G3 X0 Y253.175 I-4.344 J-253.138
X-12.004 Y252.891 I-0.007 J-253.176
G1 Z-18.5
G3 X-35.321 Y250.7 I11.997 J-252.891
X-253.175 Y0 I35.321 J-250.699
X-175.394 Y-182.577 I253.175
G1 Z-15.5
G3 X-163.244 Y-193.517 I175.394 J182.577
G1 Z-18.5
G3 X161.462 Y-195.006 I163.244 J193.517
G1 Z-15.5
G3 X173.713 Y-184.178 I-161.462 J195.006
G1 Z-18.5
G3 X154.502 Y200.566 I-173.713 J184.178
G2 X154.386 Y201.457 I0.388 J0.503
G1 X154.774 Y201.96
G0 Z5
M9
G28 G91 Z0
G28 X0 Y0
M30
%
Does the Maslow read ahead or go line by line?
Does it need a special file format besides nc?
There’s a bunch of non-supported G-code in there, it might be erroring out on some of it, check it against https://github.com/MaslowCNC/GroundControl/wiki/G-Code-and-MaslowCNC
also, ditch the % signs around the code.
Other that there is a tool change at the start, waiting for a click, the code runs in the GC simulator.
Just tried it again and it doesnt load any when I press start…
I just copied your g-code into a text editor and saved it as .nc and run it. Is there any message on the screen? Perhaps the log file has some info.
Are you aware of the ‘Tool Change’ and that GC expects you to press the ‘pause’ button?
No message at all.
Close GC. Delete the log.txt in the GC folder (it will be created new when GC starts).
Start GC and open the g-code file. Press ‘play’. Take a screenshot of GC. Close GC and upload the log.txt and the screenshot.
So i deleted the log file. No change except that I noticed when I press play it steps one line on the computer without doing anything on the router. Repeted presses step line by line with no reaponse from the router. So I tried skipping as I was started into the cut with the original program and low and behold it went. Must be a line at the beginning it doesnt like.
Or it’s waiting for the pause button because there is a tool change at the beginning.
Remove line 12 (T1 M6)
That is realy strange. I’m using the same FW/GC versions and it runs.
Did you try other files if they would run? You can dry run with z up and router off.
You bet, the original runs and that is how I started the base. Just my modified program does this and yes weird, the code looks exactly the same for the holes but mine won’t run… Can you send me your file to try?
I’m lost on this one. Did you try the file i uploaded? Thinking some ‘special character’ might got solved while copying it from your post and back into a text editor. Can’t see why it would run on linux and not on windows.
