Maslow 4 assembly guide feedback

[jwolter]

And another one.

TIL (Assembly suggestions)

Just about finished assembly. [PXL_20240422_220503533] A few suggestions/ideas: Before starting, if you don’t have a 2mm Allen wrench handle, make yourself one from a 3/4" dowel or 3d print one. I took a 1" length of dowel, drilled a 2mm hole through it end to end then added a saw kerf on one end going half way down. Insert the provided Allen wrench into it and you will save yourself a lot of time and frustration. [PXL_20240422_190926881] Assembling the arms I found that placing the ro…