Maslow for batch semi-pro production

[madgrizzle]

@BenBurnett

How good are repetitive cuts? I understand there can be imperfections in the corners etc… but after a few trials, I could just design this into the drawings. But can I expect the same result each time?

I’ll say that the Maslow is incredibly precise but can struggle with accuracy. See this post:

Accuracy Issues

Definition and the Calibration Model It’s important to make sure you use the correct language when describing your issues and the definitions of accuracy and precision are often confused. Accuracy is how close a measured value is to a desired value. You want to cut a 12-inch square and you get an 11-inch square, you accuracy is poor. Precision is how close multiple measured values are. You want to cut a 12-inch square and do so in 5 passes around the plywood and each cut perfectly overlaps t…

Either you have to calibrate to the accuracy you need or make adjustments to your design to compensate for the inaccuracy.