All motors fail test (2)

[jwolter]

We’ll need a little more information to help you troubleshoot. Start with the “All motors fail” section in the wiki and let us know that you have checked and give us all those results.

Troubleshooting: General Issues

Motors don't move Run Actions->Test Motors If both motors fail, check that the power is connected (look for the steady green light) and that the power is plugged into the Maslow shield (as in the picture below), not the arduino controller. [image] If one motor fails test, swap ports on the Maslow shield to motors to see if the problem moves with the motor. If the same motor fails, check connection at the motors to make sure the cables are plugged in correctly. If the green light is not stead…