I am ready to make something…but need a little help

[Frank_Wiebenga]

I’m using the Maslow post processor on the fusion website. Once downloaded change it so that helical moves are allowed.

Maslow #29 BuildLog

So I updated allowHelicalMoves = true; on my maslow post processor and exported this gcode. So maslow is running at least 1.1 grbl as there are G2 & G3 commands present. (TEST1) (T1 D=6.35 CR=0 - ZMIN=-3.175 - FLAT END MILL) G0 G40 G90 G17 G21 (-ATTENTION- PROPERTY SAFE RETRACTS IS SET TO CLEARANCE HEIGHT.) (ENSURE THE CLEARANCE HEIGHT WILL CLEAR THE PART AND OR FIXTURES.) (RAISE THE Z-AXIS TO A SAFE HEIGHT BEFORE STARTING THE PROGRAM.) (2D POCKET2) T1 M6 M3 S5000 G90 G17 G0 X218.754 Y221.717 …