KrabzCAM sizing issue

No Judgement
3

Hi, yes KrabzCAM uses the following resolutions:
96px = 1 inch
72pt = 1 inch

If I’m not mistaken, adobe illustrator assumes 72dpi resolution for px, while inkscape use 96dpi.

So, I think you will see the same change in scale if you try importing the svg into inkscape.

Anyway, I guess the easy way to adjust the scale in KrabzCAM would be:

  1. press “p” and then “o” to set pivot point at origin.
  2. press “s” and then “1.3333”+enter to scale up to desired size

Hope this helps

-Marius

1 Like