Question on how deep some cuts go in Maslow videos

[KingOfScolboa]

I’m sure there are other discussions but these threads might enlighten.

Smaller frame completed but still have questuions

Hi all, with the help of @dlang and the Maslow community I finally finished building my smaller frame. (8ft wide, 4x6 cutting area) my frame was built by using @bar and @dlang designs and adding some of my own.Just waiting for my kit to come in and see if it works. The only questions I have is… Do I need to shorten the chain length because of the 8 ft length instead of the normal 10 ft. or leave it as is? If I leave it as is will I have a problem with the chain length when I attach the hook a…

(smaller frame) chain length?

[unnamed]Hello, This is my first post and would love any help in this area. I just recently started setting up my machine frame. My plan was to make a smaller frame to cut down 4ftx4ft material. I built a frame to do so however now the chain is too long because the top bar is 6 feet wide as compared to the longer top bar lengths of the 4ftx8ft frames. I wasn’t able to find a lot of info about smaller frames, just a few posts. Does anyone know what I should do about the long chain. Is my best re…

I need to update my frame but I’ve set it up full size but tend to work in a 4 x 3 ft area so i could just buy smaller boards even though i’ve been cutting down large ones. I guess there’s more value for money in the larger sheets.

So the outside sheet tends to stay in place unless i’m working with something that isn’t 18mm thick or need to cut larger. I probably need to think bigger with future projects to start using this to its full potential.