When calibrating, Fitness gets restarted and gets farther away from target

Troubleshooting
1

I tried to upload the serial log file but I cannot upload a file as a new user.

Calculated Fitness Too Low. The process will automatically try again.!
Calibration values:
Fitness: 0.0810374754725899
Maslow_tlX: -323.9
Maslow_tlY: 2355.6
Maslow_trX: 3294.0
Maslow_trY: 2931.7
Maslow_blX: 0.0
Maslow_blY: 0.0
Maslow_brX: 3303.0
Maslow_brY: 0.0
RestartingFitness: 0.0850245 in 100
Fitness: 0.0850245 in 200
Fitness: 0.0850245 in 300
Fitness: 0.0850245 in 400
Fitness: 0.0850245 in 500
Fitness: 0.0850245 in 600
Fitness: 0.0850245 in 700
Fitness: 0.0850245 in 800
Fitness: 0.0850245 in 900
Fitness: 0.0850245 in 1000

Calculated Fitness Too Low. The process will automatically try again.!
Calibration values:
Fitness: 0.08502448088622037
Maslow_tlX: -282.8
Maslow_tlY: 2394.0
Maslow_trX: 3281.4
Maslow_trY: 2948.1
Maslow_blX: 0.0
Maslow_blY: 0.0
Maslow_brX: 3336.1
Maslow_brY: 0.0
RestartingFitness: 0.0828746 in 100
Fitness: 0.0828746 in 200
Fitness: 0.0828746 in 300
Fitness: 0.0828746 in 400
Fitness: 0.0828746 in 500
Fitness: 0.0828746 in 600
Fitness: 0.0828746 in 700
Fitness: 0.0828746 in 800
Fitness: 0.0828746 in 900
Fitness: 0.0828746 in 1000

20 minutes later:

Calculated Fitness Too Low. The process will automatically try again.!
Calibration values:
Fitness: 0.04641156069649606
Maslow_tlX: -595.4
Maslow_tlY: 2221.2
Maslow_trX: 2898.7
Maslow_trY: 3318.1
Maslow_blX: 0.0
Maslow_blY: 0.0
Maslow_brX: 2962.3
Maslow_brY: 0.0
RestartingFitness: 0.0464745 in 100
Fitness: 0.0464745 in 200
Fitness: 0.0464745 in 300
Fitness: 0.0464745 in 400
Fitness: 0.0464745 in 500
Fitness: 0.0464745 in 600
Fitness: 0.0464745 in 700
Fitness: 0.0464745 in 800
Fitness: 0.0464745 in 900
Fitness: 0.0464745 in 1000

Calculated Fitness Too Low. The process will automatically try again.!
Calibration values:
Fitness: 0.04647446605927452
Maslow_tlX: -602.6
Maslow_tlY: 2227.1
Maslow_trX: 2900.0
Maslow_trY: 3315.6
Maslow_blX: 0.0
Maslow_blY: 0.0
Maslow_brX: 2949.7
Maslow_brY: 0.0
RestartingFitness: 0.0463497 in 100

1 Like
2

Unfortunately the part of the log that is more helpful is a bit further up.

Do you see anything different from what is shown in this video? https://www.youtube.com/watch?v=mQwz0omOKJc

3

The video shows the number continuing to go up while mine retries after it gets to “fitness in 1000” and it does this for hours. is there any way to attach a file?

1 Like
4

You should be able to attach a file here, but it might not let you for the first day that you joined the forums because of spam things. You can always copy and paste the contents in too

5

Been trying on and off for a couple of weeks. Including deleting all firmware and starting over many times to changing extension cords out. I think I have a faulty board. What can I do from here to get it replaced?

6

The calculation isn’t actually happening inside the board it’s happening inside the web browser on your computer so unfortunately replacing the board won’t change anything :confused:

What behavior are you seeing? Can you post your log file and tell us what is happening?