Help Belts won’t retract

Troubleshooting
1

It’s been a nightmare trying to calibrate my Maslow 4.1. Over 5 times Stuck in restarting fitness loop, about 3 times the sled running into the anchor points, 3 times the belts getting chewed up due to being loose on the spool. I’ve been trying for over 8 hours changing settings, reupdating firmware, browsing forums, and not understanding what to do.

Now two of my belts won’t retract after I stopped calibration because one of them jammed. I’ve had issues retracting 2 or 3 times before before but it always worked after I restarted or clicked the retract all button a bunch of times

Any help would be greatly appreciated I’m tearin my hair out cause it feels like I’m getting nowhere

2

image
image3024×4032 3.62 MB

1 Like
3

Maslow-serial (1).log (3.2 KB)

1 Like
4

image
image3024×4032 2.72 MB

1 Like
5

The place that I would start is to increase that retraction force setting from 800 to 1200

6

thanks for the quick reply. it worked immediately! shoulda thought of it myself but I didn’t. I should probably post more to ask for help before i start getting pissy

1 Like
7

We’re here to help! I know how frustrating it can be to be stuck on something.

I’m constantly frustrated with this darn robot :joy:

1 Like