ScrumdyBum's Random Projects

Thanks Bar! Is there a size limitation?

Below “A GitHub repository, a forums thread, and a page in the Community Garden are being generated for your project!”

I get:
“4 bytes written to fileSorry, there was an error uploading your image file.uploads/mainpicture.jpgThere was an error uploading your zip file.uploads/userUpload.zip”

and under the 3 green buttons I see:
“Log from the python script which creates the github repo:
unzip: cannot find or open /var/www/html/uploads/userUpload.zip, /var/www/html/uploads/userUpload.zip.zip or /var/www/html/uploads/userUpload.zip.ZIP. rm: cannot remove ‘/var/www/html/uploads/userUpload.zip’: No such file or directory Oh darn, something went wrong in the python code… 422 {u’documentation_url’: u’https://developer.github.com/v3/repos/#create’, u’message’: u’Repository creation failed.’, u’errors’: [{u’field’: u’name’, u’code’: u’missing_field’, u’resource’: u’Repository’}, {u’field’: u’name’, u’message’: u’name is too short (minimum is 1 character)’, u’code’: u’custom’, u’resource’: u’Repository’}]} /var/www/html/createRepo.sh: line 12: cd: /var/www/html/uploads/tmp: No such file or directory deleting usrinput.txt”

Github username is geeklimit, .zip file is 32.2MB (12 pictures) and the main picture I chose was 2.88MB, a 4032 x 2268 .jpg

could be a clue here. Does the Garden take compressed files?

Yeah, the uploader says “Upload a zip folder containing project files (no spaces in file name please):”?

2 Likes

I’ll give a test upload a try and see how that goes. It’s been while since I’ve uploaded last.
Will be back 10min, or so.

ok, cool. no email notification, forum thread, garden page or github repo - in case that helps figure out where the error is.

I opened a new post not to highjack this post with troubleshooting :wink:

2 Likes

@madgrizzle now in community garden: http://maslowcommunitygarden.org/Inexpensive-add-ons-for-z-axis-slack-imprecision.html

2 Likes

WOOT! Thanks so much!

1 Like

1 inch pvc board


Back up and running! Thanks to @hannah and @bar for going above and beyond.

3 Likes

Looking good! FYI my Z-Axis popped quite often on our Metal Maslow with Used Rigid Router. I did add the metal bushing and so far I havent seen a problem. However I was very surprised how much tension the New Rigid Router’s spring has! At least three times more. I will be replacing the spring soon just to make sure I do not encounter a “pop” and “dive” into the board.

I had a pop out today. Luckily I caught it before it ruined the bee hive I’m cutting right now. I took off some of the rubber band tension holding the router down and haven’t had any pop outs after that. Wonder if they sell the springs?

https://www.ereplacementparts.com/ridgid-r2200-heavy-duty-2hp-router-combo-kit-parts-c-7929_8182_167782.html

That bottle opener is slick. What are dimensions on that and what bit?

9.5 x 5.5
Logo used .125
Profile .25

2 Likes

Langstroth Super

3 Likes

For a family member. Not an ISU fan

3 Likes

are you near Ames?

No, on the Mississippi.

Friend wanted her last name as a 5 ft decoration. Gave her a few options.

10 Likes

Pretty amazing! - are those renderings, or did you cut something that delicate?

2 Likes