Servo and Calibration Issues

[kayaker37]

Probably took out the shield, the arduino is probably fine. Looks like Maker Made and East Bay are out of stock.

Edit: I would contact whoever sold you the kit, vendors are pretty good at supporting customers.

Looks like Metal Maslow sells an assembly, make sure this is what you need:

https://www.metalmaslow.com/product/tle5206-with-arudino-board-heatsinks-power-supply-and-plastic-holder

Sometimes people make these and have them for sale, check the swap meet part of the forum:

GitHub -...

Various versions of the shield board are listed in the community garden.

http://maslowcommunitygarden.org/

There have been a few diy shield boards using parts from overseas.

Maslow DIY 1.2 shield for external H drivers - EasyEDA open source hardware lab

See this thread:

Managing motors with dual L298N

Hi I found difficult to find Maslow motorshield in Poland. Recently i bought and Arduno Mega board and L298n module: It got 4H bridges separately, and can provide 2A of current. It`s responding to TTL on 8 digital pins and can run 2 DC and 1 stepper motor. I will try to create another shield directly for this module. Can any1 paste a pinout between Arduino Mega, Encoders and H bridges? Ill share my work on EasyEDA platform.