Z-motor constantly reversing directions regardless of command input

[ShadyG]

All the help you recieved and your hard work saved my bacon. See here:

The Meticulous Z-Axis

Another update: So I trimmed ~3/16 from the clamp and solved that issue. I opted not to sand or grind it off as this is printed PLA, (layers of plastic). I used the bandsaw and sealed the cut area with CA glue. [IMG_20200201_214936] [IMG_20200201_214947] I was then having trouble with the new Z-axis motor, nothing responded as expected even with the correct values entered. So a little digging and I came across this post: I was having similar symptoms and my motor was manufactured by th…

Thanks!