Maslow in Latinoamerica

[ame]

Here in New Zealand a lot of people are using the Bosch POF 1200 AE. It’s cheap and easily available. You can find instructions to modify it here:

Bosch POF 1200 z-axis conversion guide

This is the guide to convert your Bosch POF 1200 (or POF 1400) to fit in the ring, and to accept a z-axis. If you’re using a linkage kit, like @dlang 's you don’t need to cut off the handles. You can find the files to print your own over here Remove the screw… [IMG_0492] Pry off the clip with a screwdriver… [IMG_0494] Remove 4 screws and take off the top cap… [3] Remove blue wire connections from both sides… [4%20Remove%20blue%20wire%20connections%20from%20both%20sides] Remove 4 …

You can pretty much use any router, but you need to think carefully about how you will build the Z-axis drive. If you copy the existing designs (Ridgid router popular in USA, Bosch router popular elswhere) then it’s easier.